AT tyre Advice - SPLIT FROM WANTED AD

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: AT tyre Advice - SPLIT FROM WANTED AD

Post by dan_2k_uk » Wed Oct 22, 2014 10:28 pm

Just put the sizes into a comparison calculator. It is correct
5mph difference.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: AT tyre Advice - SPLIT FROM WANTED AD

Post by dan_2k_uk » Wed Oct 22, 2014 10:31 pm

Rpm works out correctly too. 3276rpm at GPS 70 on the new tyres which is roughly what was showing on dash.

Read 3.3k off the dash.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3583
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: AT tyre Advice - SPLIT FROM WANTED AD

Post by donkeychomp » Wed Oct 22, 2014 11:33 pm

Yep my rpm is lower too, bit of an added bonus. I didn't check anything before I put on the 29" tyres but unlike my SJ the acceleration and top end hasn't suffered at all, feels the same actually.
If it ticks over...leave it

Post Reply