Page 2 of 2
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 2:38 pm
by ScottieJ
Josh-holden wrote:Also are the pad designs the same?
jap callipers use different pads to the spanish ones
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 3:13 pm
by Anton
twiss wrote:I've got the Lucas-Girling on the front and Lucas-Sumimoto on the back.... just due to availability rather than any performance reason!
Handy though as they take the same brake pads
Are they actually the same caliper but different manufacturers? The Lucas-Sumimoto's look like the Girlings to me.
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 3:17 pm
by twiss
On my ones the main caliper body looks like a spanish girling, and its takes the brake pads with the spring-things attached to them, but the bits that mount onto the caliper mount are nearly the same as the japanese ones... I'll take a pic next time I have a wheel off
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 4:18 pm
by Josh-holden
right.. iv got a 1992 Spanish samurai. to me the callipers look like the Lucas-Sumimoto calliper. is this correct? if so where could i get hold of one? what else do they fit so i can give the factor something to go off?
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 4:47 pm
by Anton
Good to know, mate - there's another thread on here about GV callipers where that question came up yesterday, now we have an answer! Don't know if they take the same pistons, do you?
Doesn't really matter, I'm just curious.
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 9:57 pm
by Josh-holden
I have no idea
Re: Need to know about samurai calipers
Posted: Tue Dec 16, 2014 11:11 pm
by Anton
Josh-holden wrote:right.. iv got a 1992 Spanish samurai. to me the callipers look like the Lucas-Sumimoto calliper. is this correct? if so where could i get hold of one? what else do they fit so i can give the factor something to go off?
It's likely to be lucas-girling. If it's sumimoto, it's probably been pulled off of a Jimny.
Josh-holden wrote:I have no idea
Oops, sorry - my post was aimed at Twiss...