Page 2 of 2
Re: 5 speed
Posted: Wed Apr 06, 2011 5:58 pm
by Edweird
Turb() wrote:Well I was on the motorway today and managed to get my lil 1.0l to do 70, but it was doing like 6000rpm lol.
Another gear is needed methinks...
I have the same issue with mine. Had 75 once just to see how fast she'd go. Normally I barely touch 60. I need a 5th to bring my MPG down.
Re: 5 speed
Posted: Wed Apr 06, 2011 6:26 pm
by Turb()
Would bigger tyres bring the revs down that much?
Re: 5 speed
Posted: Wed Apr 06, 2011 8:16 pm
by Edweird
They'd bring them down a bit, and the bigger the tyres the bigger the drop in revs.
Re: 5 speed
Posted: Wed Apr 06, 2011 8:34 pm
by Henry
Edweird wrote:They'd bring them down a bit, and the bigger the tyres the bigger the drop in revs.
If your running standard, and you dont lift, you will be able to get 1" max safely. Now that wont alter your speedo that much 4mph ish?
Re: 5 speed
Posted: Wed Apr 06, 2011 9:59 pm
by twiss
Mine's got a higher top speed with 235x80 r15s on...
But then again I have 5 gears
I can cruise at 70 at what sounds like about 4-5000rpm
Re: 5 speed
Posted: Thu Apr 07, 2011 8:40 am
by xiztrn
twiss wrote:I can cruise at 70 at what sounds like about 4-5000rpm
...until you run out of petrol
Re: 5 speed
Posted: Thu Apr 07, 2011 12:24 pm
by twiss
lol yeah fair point... it's good on petrol at high speed.
I think that High Wycombe and back the other day on £30 was a bit adventurous
It's about 170 miles round trip lol
Re: 5 speed
Posted: Sat Apr 09, 2011 8:26 pm
by Turb()
I got the beasty wheels/tyres today I've had my eye on for a while. Will get pics when I fit them.
The deal was tho whatever I pay for them I have to give an equal amount to the other half....
So I'm now £400 down after getting the wheels for £200 lol!
FML...
I hope its worth it!!
Re: 5 speed
Posted: Sun Apr 24, 2011 10:49 am
by Turb()
Been meaning to upload a couple of pics:
Going to need some wheel spacers as the fronts catch on the springs on full lock
Re: 5 speed
Posted: Tue Apr 26, 2011 11:20 am
by twiss
Sweet! Looks cool!
Go to bits 4 vits or ebay for the spacers!