Page 2 of 2
Re: Stalling in tickover
Posted: Mon Feb 20, 2012 12:35 pm
by charger
How do you alter the mix where s that screw,
I have also just noticed there should be a pip that goes from the right hand side of the engine over the top in the to cold air feed mine is missing.
Re: Stalling in tickover
Posted: Mon Feb 20, 2012 12:41 pm
by ScottieJ
ScottieJ wrote:have you checked the wiring to the fuel stop solenoid?
Honestly I would check this first, before continuing, if the fuel stop solenoid is restricting fuel flow (they dont completely stop it when there is now power feed) then you wont be able to set the fuel mixture as the carb wont be getting enough fuel!
Re: Stalling in tickover
Posted: Mon Feb 20, 2012 12:47 pm
by charger
I will check that first any pointers to where it is?
Re: Stalling in tickover
Posted: Mon Feb 20, 2012 1:17 pm
by ScottieJ
Re: Stalling in tickover
Posted: Mon Feb 20, 2012 8:23 pm
by charger
Thanks for that will be having a crack 2 moz
Re: Stalling in tickover
Posted: Sun Feb 26, 2012 9:50 pm
by charger
It no longer cuts out but I had to set the idle to 3000rmp to stop the problem so not a great fix. I had the electrics checked out with one of them hand held devices & the problem isn't there.