Suzuki Club UK

Nope
Never seen a kit for the 410. Guess it's not common enough.
Just think of how many samurai's there are in the USA.

The hoses arrived today, look good on first inspection but I'll let you know how good when I come to fit them.

Just compared them to the standard ones that I'm replacing. The bore size is spot on, maybe a little tight, but some of the pipe may be a bugger to fit as the shape isn't quite right, some worse than others.

Looks promising
My lower hose is equal unlike the one that was fitted to yours. IE: like the one supplied.
My heater out hose is like the one supplied. Yours looks like a piece of universal hose.

The others hoses match

Spotted one potential problem. As these kits are aimed at the American market that is what there made for. Only thing is hose number 19 is different on a right hand drive vehicle. In your photo they look to match quite well, but mine has a tight 90 degree bend just under the heater valve like shown in this diagram.

19 is on & in place it's a little big lenght wise by a good fit, I'll put a pic up when I'm home.

The one I most concerned about is hose 20. As I'm fitting it to a 1.6 the exit for the water rail (or whatever it's called) isn't on the back, it's on the side

Anyway this is 19 in position.

I see your heater valve is already fitted at an angle which helped the hose fit

I see what you mean about the water rail being different on the 1600.