Page 15 of 42

Re: Project KJA

Posted: Sat Jan 26, 2013 10:37 pm
by ianedwards
um dont know what happened, hadnt finished, lol
exhaust all in, petrol lines ect
exhaust all in, petrol lines ect
IMG_1079.JPG (1.88 MiB) Viewed 5946 times
hydraulic pump and ram takes the place of the petrol tanks original position. fuel pump in. just needs i tidy up.
hydraulic pump and ram takes the place of the petrol tanks original position. fuel pump in. just needs i tidy up.
IMG_1080.JPG (1.74 MiB) Viewed 5946 times
lines in, petrol - return ,  and electric cables for winch ect on the other side, oh and re positioned exhaust
lines in, petrol - return , and electric cables for winch ect on the other side, oh and re positioned exhaust
IMG_1081.JPG (1.87 MiB) Viewed 5946 times
power steering pump and box in, pump is lifted out of the way of the chassis, just need a belt. pipes to go in later
power steering pump and box in, pump is lifted out of the way of the chassis, just need a belt. pipes to go in later
IMG_1082.JPG (2.02 MiB) Viewed 5946 times
rear frame all undercoated,
rear frame all undercoated,
IMG_1083.JPG (2.03 MiB) Viewed 5946 times
winch with control box, and junction box for all the cables
winch with control box, and junction box for all the cables
IMG_1084.JPG (1.75 MiB) Viewed 5946 times
winch, removable towbar, didnt really want rollers, but the old man ordered it without me knowing, so there it is :(
winch, removable towbar, didnt really want rollers, but the old man ordered it without me knowing, so there it is :(
IMG_1086.JPG (1.92 MiB) Viewed 5946 times
rear frame again
rear frame again
IMG_1088.JPG (2.1 MiB) Viewed 5946 times
Ram, pump , exhaust , wires ready for switches.
Ram, pump , exhaust , wires ready for switches.
IMG_1087.JPG (1.87 MiB) Viewed 5946 times
the rest of it lol
the rest of it lol
IMG_1090.JPG (2.01 MiB) Viewed 5946 times
the monkey
the monkey
IMG_1092.JPG (1.92 MiB) Viewed 5946 times

Re: Project KJA

Posted: Sat Jan 26, 2013 10:47 pm
by Jordi
Lovin' "the rest of it" a nice neat pile of suzuki shaped bits stacked in the corner.

Crackin build bud, coming on well. Take it, it's gonna be a bit of a work horse too.

Jordi

Re: Project KJA

Posted: Sun Jan 27, 2013 10:55 am
by dazerede
That will look the nuts when finished

Re: Project KJA

Posted: Sun Jan 27, 2013 2:11 pm
by ianedwards
Yea going to use it for all sorts, yea should be wicked.

Can't do any thing else until I get some more paint. Might go a tiny bit darker for the body than I did for the chassis.

Ian

Re: Project KJA

Posted: Sun Jan 27, 2013 2:22 pm
by dazerede
ye that blue looks awsome

i should of done my sj a darker blue

Re: Project KJA

Posted: Sun Feb 03, 2013 9:12 pm
by ianedwards
Evening chaps, bit more progress made, just need to get some black paint when its back in stock. to finish it off.

i put the lights in place, looks more real now lol, winch fair lead missing, will explain in a bit.
View of rear, lights in :)
View of rear, lights in :)
IMG_0117.JPG (1.95 MiB) Viewed 5819 times
IMG_0119.JPG
IMG_0119.JPG (1.7 MiB) Viewed 5819 times
veiw of rear
veiw of rear
IMG_0121.JPG (1.8 MiB) Viewed 5819 times
mud guards to be painted in the same type of paint as the body but, black
mud guards to be painted in the same type of paint as the body but, black
IMG_0122.JPG (1.82 MiB) Viewed 5819 times
rear protection, with my led floodlight, still to be painted black
rear protection, with my led floodlight, still to be painted black
IMG_0123.JPG (1.83 MiB) Viewed 5819 times
body raised in tip position, it will go a bit further, but thats as high as i could get it with the hoist. as i havent got a battery for the pump yet
body raised in tip position, it will go a bit further, but thats as high as i could get it with the hoist. as i havent got a battery for the pump yet
IMG_0125.JPG (1.91 MiB) Viewed 5819 times
raised up, third section of ram will extend the same as the others.
raised up, third section of ram will extend the same as the others.
IMG_0128.JPG (2.01 MiB) Viewed 5819 times
and this is why the rollers are missing, when the body is up the back hits the roller, but all is not lost, go with original plan of rope and alloy fairlead and it will be ok, apart from ill have to weld the hole up as its way bigger than it should be for a alloy one. which is a shame. Not my mistake for a change lol
and this is why the rollers are missing, when the body is up the back hits the roller, but all is not lost, go with original plan of rope and alloy fairlead and it will be ok, apart from ill have to weld the hole up as its way bigger than it should be for a alloy one. which is a shame. Not my mistake for a change lol
IMG_0126.JPG (1.81 MiB) Viewed 5819 times
Thanks

Ian

Re: Project KJA

Posted: Sun Feb 03, 2013 9:30 pm
by turbo-tom
Im sorry mate but that chassi , ram , bed looks f*kin' awesome and thoughs led lights really set it off!,
if i was you id scrap ya day job and build up KJA's this has got to be one of the best around!

good luck with the rest of it! you are doing a 101% job at it!

tom ;)

Re: Project KJA

Posted: Sun Feb 03, 2013 9:42 pm
by Edweird
This truck is looking like it's going to be up there with that quad carb yankee zook and 'Zero'

Re: Project KJA

Posted: Sun Feb 03, 2013 9:44 pm
by dazerede
:jawdrop: that i one nice piece of equipment

as turbo tom said them led lights set it off

naw i want a lwb

Re: Project KJA

Posted: Sun Feb 03, 2013 10:06 pm
by dan_2k_uk
Yeah no offence to any other KJA owners but when finished this is easily going to be best in the country in my opinion!