Page 17 of 35
Re: Kiwizook's resto
Posted: Wed Oct 16, 2013 8:30 am
by kiwizook
got all these bits today
new transfer box mounts, transfer case lever boot, and new crank shaft bolt.
- all the new bits and bobs
- Pic_1016_222.jpg (273.29 KiB) Viewed 5380 times
also had a look at the exhaust, and found this
- one side...
- Pic_1016_224.jpg (293.17 KiB) Viewed 5380 times
- ... and the other
- Pic_1016_225.jpg (241.46 KiB) Viewed 5380 times
I'll try to find a new splitter that fits, and weld in a new splitter. one more thing to add to the list
Re: Kiwizook's resto
Posted: Fri Oct 18, 2013 5:02 am
by kiwizook
so started with this
- not so good
- Pic_1016_224.jpg (293.17 KiB) Viewed 5356 times
cut the broken bit out
- cut the nastiness out
- Pic_1017_227.jpg (417.49 KiB) Viewed 5356 times
go these
- shiny bits
- Pic_1017_228.jpg (371.79 KiB) Viewed 5356 times
and managed to do this
- and made this :D
- Pic_1017_229.jpg (275.91 KiB) Viewed 5356 times
- Pic_1017_230.jpg (311.11 KiB) Viewed 5356 times
the welder wasn't going well, but after I had it set up right, I started over again, and I'm quite happy with it now. just have to join the two halves under the wagon now, and weld them together
Re: Kiwizook's resto
Posted: Fri Oct 18, 2013 7:19 am
by dazerede
That looks better all u have to do naw is fit the cherry bomb on the end and that will be sweet
Re: Kiwizook's resto
Posted: Fri Oct 18, 2013 10:17 am
by kiwizook
I'll be keeping the standard muffler on it for now, as it has to go through a re-vinning process, and they might not like a cherry bomb on there. I will eventually put a straight through with a cherry bomb on it though, more noise than power
Re: Kiwizook's resto
Posted: Fri Oct 18, 2013 10:28 pm
by turbo-tom
kiwizook wrote:more noise than power
More noise then you can shake a stick at.i like
Re: Kiwizook's resto
Posted: Fri Oct 18, 2013 11:30 pm
by dazerede
Haha I like that more noise than power
Re: Kiwizook's resto
Posted: Fri Oct 25, 2013 8:10 am
by kiwizook
alright then. got monday off as it's labour weekend. I've just set the welder up with 0.6mm wire, got plenty of gas, weld through primer and sheetmetal. you all know what that means
Re: Kiwizook's resto
Posted: Fri Oct 25, 2013 8:20 am
by Jordi
Your coming round mine to repair all my bodywork?
Re: Kiwizook's resto
Posted: Fri Oct 25, 2013 9:13 am
by kiwizook
unfortunately that won't work in a single day, I could do if I had more days off
Re: Kiwizook's resto
Posted: Fri Oct 25, 2013 9:28 am
by Jordi
Guess you must be plating, patching and welding yours then.