Suzuki Club UK

Just tested it and all works great
im tryin to get the vitara rad to fitt naw...really cant see how its possible
even after i have checked your step by step its massive headake
and my bros too tight to buy a sammy rad for it so gta use what iv got here :(

It is tight but it fits

U trying to do it with viscous fan?

ye mate standard fan..iv sort of got it in but its at an angle and cant use the plastic guard thing?

It will go in straight if you modify the mounts.

I have photos somewhere if you really want them. (Its a bit rammed in there with the power steering to take any more though!)

be very gratefull if you could post some pics of it mate?

Don't seem to have any of what I actually did to get it in there

The drivers side is the 1.3 bracket spaced with a flat plate drilled to suit the holes in the 1.3 bracket and the 1.6 rad.

Then on the passenger side I slitted some small wedges out of the 1.3 bracket to allow it to collapse into a dog leg shape so the rad ends lower and further towards the passenger side. This allows it to clear the bonnet and allow space for power steering.

I think I actually did the passenger side first then once I welded it up I then made the plate for the drivers side to join the old mount and the radiator.

The cowling has been trimmed to suit o the drivers side.

Hope this makes sense.

I will go try find/take some better pics.

Found the one of the original bracket that has been adapted.

ye thats great mate il take laptop out the back with me tomoz itl make sense once im under the bonnet
thanks mate

The impression i got Dan was you shoe horned it in and just cut off any bits that were fouling.