doubts...
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: doubts...
Just lift up an SJ axle in one hand and a jimny axle in the other... see which one you think is more substantial
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: doubts...
jimnys also cost a fortune to mod
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: doubts...
spoa on 215 15
spua all the way, maybe grab some at/ road tyres cheap from ebay. sometimes people cant give them away. better fuel eco to i believe, i seem to get a couple of miles less with my mts (same size) than the road tyres i have too.
when did you last give it a good service? leads plugs etc etc . a simple service can make a huge difference to a small engine.
i get a cruising speed of 50 - 55 ish in my sami. will get over the motorway limits if i need to but thats pushing it. had my pick up at almost time travel speed once .
i average 33-35 mpg. in the sammi with 195 80 15
pick up average 29 -31 with 235 75 15 - both with dodgey asin carbs.
use my sammi every day , love it
spua all the way, maybe grab some at/ road tyres cheap from ebay. sometimes people cant give them away. better fuel eco to i believe, i seem to get a couple of miles less with my mts (same size) than the road tyres i have too.
when did you last give it a good service? leads plugs etc etc . a simple service can make a huge difference to a small engine.
i get a cruising speed of 50 - 55 ish in my sami. will get over the motorway limits if i need to but thats pushing it. had my pick up at almost time travel speed once .
i average 33-35 mpg. in the sammi with 195 80 15
pick up average 29 -31 with 235 75 15 - both with dodgey asin carbs.
use my sammi every day , love it
Andys Rusty Suzuki Emporium
- Russ24
- Can I have a tow
- Posts: 438
- Joined: Sun Jan 17, 2010 1:53 pm
- Location: the forests of the northern hemisphere
Re: doubts...
its ok.
the red one is doing my head in. massive hole in the bulk head.. water getting everywhere...
but as andyrew has said...... SPUA and road tyres.
well i have a donor car.. thats WATERTIGHT.
ladies n gents... im going break up the post van.
the red one is doing my head in. massive hole in the bulk head.. water getting everywhere...
but as andyrew has said...... SPUA and road tyres.
well i have a donor car.. thats WATERTIGHT.
ladies n gents... im going break up the post van.
- Attachments
-
- JEEPS.jpg (86.33 KiB) Viewed 6002 times
Re: doubts...
please dont chop it and scrap it. strip and swap parts to build your ideal sj.then sell the rolling shell and body to someone , maybe ebay as scrap price start?
to many sj getting chopped and scrapped
to many sj getting chopped and scrapped
Andys Rusty Suzuki Emporium
- Russ24
- Can I have a tow
- Posts: 438
- Joined: Sun Jan 17, 2010 1:53 pm
- Location: the forests of the northern hemisphere
Re: doubts...
andyrew wrote:please dont chop it and scrap it. strip and swap parts to build your ideal sj.then sell the rolling shell and body to someone , maybe ebay as scrap price start?
to many sj getting chopped and scrapped
yeha your right.
will strip it to a chassis and shell and ebay it.
will be taking pretty much everything off it. which means if it doesnt sell i will have to scrap it. becuase it wont be at my propert.y
- Lil_Beastie
- Engaged 4wd low
- Posts: 104
- Joined: Thu May 19, 2011 9:23 am
- Location: traveling between Reading and Slough
Re: doubts...
They're both tin tops! It should be illegal to strip and scrap them.
Keep atleast one for offroading/better finances.
You'll regret it and end up buying another sometime along the line, for more money.
Also youre not going to be getting your mud and addrenaline fix if you sell up. :(
Keep atleast one for offroading/better finances.
You'll regret it and end up buying another sometime along the line, for more money.
Also youre not going to be getting your mud and addrenaline fix if you sell up. :(
Was:
Lil Beastie - 95 Sammie http://www.suzukiclubuk.co.uk/forum1/vi ... 22/t,3134/
Now:
Lil Monster - 86 VW Caddy http://rat-look.com/forum/viewtopic.php?f=10&t=8805
Lil Beastie - 95 Sammie http://www.suzukiclubuk.co.uk/forum1/vi ... 22/t,3134/
Now:
Lil Monster - 86 VW Caddy http://rat-look.com/forum/viewtopic.php?f=10&t=8805
- turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: doubts...
Lil_Beastie wrote:They're both tin tops! It should be illegal to strip and scrap them.
i agree with that , always wanted a tin top but landed up with a soft top as i couldnt find one
Tom
Ford Fiesta ST
Ford Fiesta ST
Re: doubts...
Russ please don't break the van, they are getting harder to find nowadays! how big is the hole? cant it just be repaired? I want to see a pic!
- Russ24
- Can I have a tow
- Posts: 438
- Joined: Sun Jan 17, 2010 1:53 pm
- Location: the forests of the northern hemisphere
Re: doubts...
ok ok.. i wont scrap it...
fuck i wont even strip it...
was getting abit panicy because all my SJ stuff is at work and i got a feeling going to have to leave soon. all these bits (and black sj) and know where to keep it all.
today i went round trying to find holes... armed with silicon.
few grommets missing but nothing that would indicate water getting in large quantities....
i had a mechanic friend come round and look at the chassis. its got an IMPRESSION on it... but not a full bend or a twist in the chassis so its ok.
i think i will have to sell the black SJ as it stands with a fucked engine and damaged door sill. just so can justify keeping all the bits and not have to find somewhere to store it.
but im not going to scrap it. i apologize for saying such offensive things.
fuck i wont even strip it...
was getting abit panicy because all my SJ stuff is at work and i got a feeling going to have to leave soon. all these bits (and black sj) and know where to keep it all.
today i went round trying to find holes... armed with silicon.
few grommets missing but nothing that would indicate water getting in large quantities....
i had a mechanic friend come round and look at the chassis. its got an IMPRESSION on it... but not a full bend or a twist in the chassis so its ok.
i think i will have to sell the black SJ as it stands with a fucked engine and damaged door sill. just so can justify keeping all the bits and not have to find somewhere to store it.
but im not going to scrap it. i apologize for saying such offensive things.