Suzuki Club UK

remember if you are using a sammy gearbox you need the sammy flywheel on there too

I have most of a g13a so have that already too just deciding which gearbox to use

I might be able to finally do some work on the truck again next week. Just finished moving house. Have moved all my tools built a workbench. Mounted the drill press and bench grinder and wired up some lights and powerpoints.

That's bigger than my flat!

That's too tidy.....you need to get the 410 in there and make it look used

The 410 is in there i standing on it. Just to make you all hellions I wasn't going to say but that's the workshop part I'm standing in a double garage on the front. And the pit is open and dry as a bone my g16a down there currently as we have a chain block

Finally managed to get some work done on the zuk. Passenger floor finally in and mostly welded into place.

Still thinking about chopping the rear end off and making it into a tubular rear

Started building my rocksliders today. Took a while to work out how I wanted to mount them. Going to weld them straight to the chassis going to be extremely strong but not too heavy

Fwb2700 wrote:Started building my rocksliders today. Took a while to work out how I wanted to mount them. Going to weld them straight to the chassis going to be extremely strong but not too heavy

Take it you'll be bracing / reinforcing the chassis where they mount.

No turning back now