Page 1 of 3
gangsta lean
Posted: Mon Apr 07, 2014 7:53 am
by ektoz
Hello mates!
i started to have a good amount of lean on the drivers side an its driving me nuts!
i was thinking to jack it up and leave it for a couple of weeks !?
any idea hou to fix it??
Re: gangsta lean
Posted: Mon Apr 07, 2014 8:57 am
by dan_2k_uk
Swap the springs over. It will lean to the passenger side for a bit but then probably balance out.
Re: gangsta lean
Posted: Mon Apr 07, 2014 5:30 pm
by ferris
Gangsta lean drives me mad
![pissed :pissed:](./images/smilies/pissed.gif)
. I thought i'd solved it when i put the YJ's on but its started to do it again
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
.
As Dan says just have to swop the springs over.
Re: gangsta lean
Posted: Mon Apr 07, 2014 5:31 pm
by andyrew
Very common problem
Few options are
- become a gangster
- swap springs over
- marry a fat bird
- when not in use leave on axles stands with drivers side wheels hanging
- drive only on roads with lots of camber.
Some are more practical than others.
Financial expense of being gangsta' should be considered first.
Re: gangsta lean
Posted: Mon Apr 07, 2014 8:17 pm
by kiwizook
^^
![hahaha :hahaha:](./images/smilies/laughing2.gif)
Re: gangsta lean
Posted: Mon Apr 07, 2014 10:38 pm
by twiss
Go find a roundabout and drive round and round it as fast as you can
![;) ;)](./images/smilies/icon_wink.gif)
Re: gangsta lean
Posted: Tue Apr 08, 2014 9:35 am
by ektoz
i will retension the front and rear driver side leafs i think is the best opion, by the way they are
CJ leafs.
Re: gangsta lean
Posted: Wed Apr 09, 2014 8:23 am
by Cyprus Geoff
Gangsta's need machine gunning!!!
![guns :guns:](./images/smilies/191733.gif)
Re: gangsta lean
Posted: Wed Apr 09, 2014 1:56 pm
by muddymesser
i just jacked up the low side over night usually and its fine for afew weeks
or carry a bag of cement/toolbox on the passenger seat
Re: gangsta lean
Posted: Wed Apr 09, 2014 9:39 pm
by dazerede
Mine is leaning to the driver side even with out me in it so I took the rear springs off and noticed the more curved spring was already on the driver side
![scratch :er:](./images/smilies/icon_scratch.png)
but people say when driving down the road that it is leaning to the driver side quite a bit
Plus my rear springs should be 1" higher than standard but they have gone to standard hieght naw and the truck is leaning back aswell lol