back seat brackets?
- stevepsj413
- Engaged 4wd low
- Posts: 193
- Joined: Fri May 31, 2013 10:58 pm
back seat brackets?
Hi,I was just on with fitting the seats in the back of my samurai, the front of the seats screw straight to the floor but the back of the seat looks like it should clip to another bracket on the floor but I don't have this part, can anybody post a picture up of what it should look like, I think I can make one from a bit of plate and some round bar but a picture to work from would be nice. The seats are the split folding style from an 1989 Jap samurai. Thanks steve.
- Attachments
-
- DSC_0048 (2).jpg (246.5 KiB) Viewed 6335 times
-
- DSC_0050.jpg (270.56 KiB) Viewed 6335 times
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: back seat brackets?
Unfortunately those seats are different to the ones that would have come with a late model samurai.
Mine have a bolt on hinge at the front, then just bolts in the back going through the seat mounting bracket straight into the floor.
It had wingnuts holding it on but they have since gone missing as I dont have the rear seats in
Mine have a bolt on hinge at the front, then just bolts in the back going through the seat mounting bracket straight into the floor.
It had wingnuts holding it on but they have since gone missing as I dont have the rear seats in
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: back seat brackets?
Mine was the same as Twiss, bolted to the holes in the floor as in your pic next to seats
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
- stevepsj413
- Engaged 4wd low
- Posts: 193
- Joined: Fri May 31, 2013 10:58 pm
Re: back seat brackets?
Yeah these seats are different to the ones in my other samurai, they just bolt straight to floor next to the seatbelts, these ones have the belt clip built into the seat and the back of the seat is quite far from the holes in the floor
- Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: back seat brackets?
"Googled" and found these..
- Attachments
-
- 002.jpg (30.33 KiB) Viewed 6321 times
-
- hh.JPG (50.01 KiB) Viewed 6321 times
2005-GV 1600se, "Hell" What do I know!
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: back seat brackets?
That looks like it's the one to me
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
- stevepsj413
- Engaged 4wd low
- Posts: 193
- Joined: Fri May 31, 2013 10:58 pm
Re: back seat brackets?
Thanks much appreciated
- stevepsj413
- Engaged 4wd low
- Posts: 193
- Joined: Fri May 31, 2013 10:58 pm
Re: back seat brackets?
Made myself one of theses today, quite pleased how it turned out.
- Attachments
-
- DSC_0055.jpg (474.43 KiB) Viewed 6294 times
-
- DSC_0054.jpg (455.71 KiB) Viewed 6294 times
-
- DSC_0053.jpg (476.53 KiB) Viewed 6294 times
-
- DSC_0052.jpg (492.4 KiB) Viewed 6294 times
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: back seat brackets?
Tidy job on the bracket.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank