Page 1 of 2

soft top needed

Posted: Thu Sep 11, 2014 1:31 pm
by kevin9044
Hi everyone, im new to the club and have just bought 2 sj's with the intention of fixing them up. One is a tin top (very rotten body) and the other a 93 samurai soft top. It has nothing for the roof at all!! No clips, brackets, bow or hood. Can anyone help me out with sourcing these parts as im really struggling. Can get the hood easy enough but nothing to hold it tight or on. Please help..I really want to get it back to original condition and not cut it up, I want to do that to the tin top!
Thanks
Kev

Re: soft top needed

Posted: Thu Sep 11, 2014 5:16 pm
by Darrell
Welcome to the club.

Mike Harris may well be able to sort out what you need.
Try asking in the wanted section and if he doesn't spot it PM him.

Or give him a ring http://forum.suzukiclubuk.co.uk/me ... le&u=14965

Re: soft top needed

Posted: Thu Sep 11, 2014 9:57 pm
by kevin9044
Thanks Darrell
I'll give it try. Really been struggling to get these bits!!

Re: soft top needed

Posted: Thu Sep 11, 2014 10:51 pm
by Darrell
Don't know what differences there are over the years (If any?)

Re: soft top needed

Posted: Thu Sep 11, 2014 11:46 pm
by donkeychomp
Don't think there were any. I've put a 410 soft top on a 413. Fastbacks fit all models too.

Re: soft top needed

Posted: Fri Sep 12, 2014 4:11 pm
by kevin9044
Thanks guys
I got hold of Mike Harris..he hasnt anything at the mo but will let me know when he has. I got long time before that anyway...lots of floor welding to do!! :-( oh well..will be nice when its all done.

Re: soft top needed

Posted: Fri Sep 12, 2014 4:13 pm
by kevin9044
Also ive decided to get shot of the tin top so if anyone wants a project or a good engine gearbox transfer box etc let me know. The body is way past it!! Call me 07875637734

Re: soft top needed

Posted: Fri Sep 12, 2014 4:31 pm
by ScottieJ
Can you post some pics of the body.....what some say is way past it I see as a challenge!

Re: soft top needed

Posted: Fri Sep 12, 2014 5:47 pm
by kevin9044
Hopefully the pics have posted. Im new to this forum so still trying to navigate my way around it!

Re: soft top needed

Posted: Fri Sep 12, 2014 6:23 pm
by twiss
hmmm yes that is rather corroded... but you could virtual lift it and you wouldn't have to chop much off that front arch ;)

if its like that there i dread to see the other arches, sills and the inside floor