New drive belt

All tech relating to the Suzuki Vitara that won't relate to any other models, Front IFS etc.
Post Reply
rob381
Got muddy boots
Got muddy boots
Posts: 40
Joined: Thu Dec 05, 2013 1:07 pm

New drive belt

Post by rob381 » Thu Nov 13, 2014 6:46 pm

Hi guys, just managed to fit a new drive belt on my 54 plate 2.0 GV. The old one was really easy to remove but the new one was a really tight fit to get back on. Just to satisfy my own curiosity I tried to remove it again and refit it, got my socket and bar on the spring loaded adjuster and turned it clockwise but it would only move a small amount and I had to slide the belt off the adjuster. Refitted the belt again but it was a very tight fit over the adjuster. I have followed the procedure as per manual but I am really struggling to see any markings on the adjuster to make sure I have fitted it correctly. Could the old belt have stretched ? Any advice much appreciated.

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: New drive belt

Post by Darrell » Thu Nov 13, 2014 9:53 pm

I doubt the old belt has stretched, but I would expect the drive/v side to wear out over time making it a little loose. I only have the same info as you from the manual, but will post it anyway.
Sorry I can't be more help..
Attachments
J20 engine generator belt.jpg
J20 engine generator belt.jpg (657.49 KiB) Viewed 3384 times
2005-GV 1600se, "Hell" What do I know!

rob381
Got muddy boots
Got muddy boots
Posts: 40
Joined: Thu Dec 05, 2013 1:07 pm

Re: New drive belt

Post by rob381 » Fri Nov 14, 2014 7:26 am

Thanks Darrell, yeah that's the info I've got. It's the markings on the actual adjuster that I can't make out ! I'm just worried that it may be over tight because as in previous post I can only get a very small amount of movement on the the adjuster to release the tension. Thanks for taking the time to reply.

Post Reply