Suzuki Club UK

Posted: **Sat Jul 04, 2015 2:19 pm**

Hiya, can anyone help?
Tried to remove front o/s driveshaft seal.
Is there a special tool needed to remove the hub?
Took the small plate off behind the hub centre, there are 4 holes. Is there a tool which goes into these holes and releases the hub.
I'd be grateful for any help.
Thanks.
Jody.

Posted: **Sat Jul 04, 2015 3:09 pm**

I've taken the relevant sections from the workshop manual and put them here http://www.mediafire.com/view/33umib2u0 ... seals..pdf

The 4 pronged tool is for the wheel bearing which I believe can be left alone for seal replacement.

Posted: **Sat Jul 04, 2015 3:13 pm**

This may also be worth a read http://www.bits4vits.co.uk/store/vitara ... d_458.html

Suzuki Club UK

2001, 1.6 front driveshaft seal.

2001, 1.6 front driveshaft seal.

Re: 2001, 1.6 front driveshaft seal.

Re: 2001, 1.6 front driveshaft seal.