Power steering options

Post your questions about your suspension and steering problems here!
Post Reply
Gardiner
Engaged 4wd low
Engaged 4wd low
Posts: 105
Joined: Sat Oct 06, 2012 10:18 pm

Power steering options

Post by Gardiner » Mon Jul 10, 2017 8:16 am

Hi all what are the options for a SJ to put power steering on.
I got a SJ with a 5" Calmini full suspension lift.
Thanks in advance

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Power steering options

Post by zook123 » Mon Jul 10, 2017 8:31 am

As I popped in your other post, Jimny PS will fit.

http://forum.suzukiclubuk.co.uk/vi ... php?t=1634
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

Gardiner
Engaged 4wd low
Engaged 4wd low
Posts: 105
Joined: Sat Oct 06, 2012 10:18 pm

Re: Power steering options

Post by Gardiner » Mon Jul 10, 2017 11:51 am

So will the pump off a jimny or vitara bolt ok to block of a 413 and what bottom pulley and Pittman arm issues might I encounter

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Power steering options

Post by ScottieJ » Mon Jul 10, 2017 12:11 pm

The pump mount off an Vit G16 8v engine fits.

You will need to tweak the rad mount on the chassis though for the pump pulley clearance.

If you have a drop pitman arm with your calmini lift kit then it will not fit the jimny box, I don't think there's a drop pitman arm available for the jimny box.
If you aren't running a drop pitman arm then the stock jimny pitman arm will be pretty much the same steering geometry wise as the stock sj pitman.
Zuki Build

Steady as she goes!

Gardiner
Engaged 4wd low
Engaged 4wd low
Posts: 105
Joined: Sat Oct 06, 2012 10:18 pm

Re: Power steering options

Post by Gardiner » Mon Jul 10, 2017 12:48 pm

I think there is a drop pitman arm on her i bought it with kit on and when i look on calmini website it comes with one so what would the next option be ??

User avatar
Curtisflip
Got muddy boots
Got muddy boots
Posts: 9
Joined: Thu Nov 27, 2014 2:23 am
Location: Peoria, Arizona

Re: Power steering options

Post by Curtisflip » Fri Sep 01, 2017 12:32 am

I added electric steering, easy fab to do and reasonable cost. Here is a link to my write up.
http://bbs.zuwharrie.com/content?topic=134451.0

https://www.youtube.com/watch?v=90e4fUhcH_4
86 Samurai, 2" suspension lift, 29" Mud Tires, 6.5 to 1 t-case, rear spool, full internal cage. Driven by partially trained Chimp.

User avatar
tomcat
Engaged 4wd low
Engaged 4wd low
Posts: 221
Joined: Wed May 04, 2022 6:59 pm

Re: Power steering options

Post by tomcat » Sun Jan 28, 2024 2:46 pm

749e712e-c9bc-49db-ada0-27d289770d8c.jpg
f2d8b7e0-1a39-4d52-a689-d7dce4b7ac4b.jpg
Can I revive this thread with a question.
Have purchased a PAS system from a Jimny.
The engine mount for the PAS pump is as the attached pictures.
It does not seem to fit my G13A Santana Samurai engine. What am I getting wrong?

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Power steering options

Post by ScottieJ » Sun Jan 28, 2024 4:56 pm

Was the set up and mount from a Jimny with an M series engine? You need a mount from a vitara G16 8v engine. It’s still not always a straight bolt on swap though as it can be tight for chassis clearance
Zuki Build

Steady as she goes!

User avatar
tomcat
Engaged 4wd low
Engaged 4wd low
Posts: 221
Joined: Wed May 04, 2022 6:59 pm

Re: Power steering options

Post by tomcat » Sun Jan 28, 2024 6:46 pm

Scott
Your comments noted. Thanks.

Post Reply