i have asked the fabricator to put a feed in , return , and breather in etc
someone said i need to put a one way valve in it ? but i cant remember what pipe
also were shall i run the breather too ? take it highest point somewere
help pleaseee
Petrol tank breather
-
turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Petrol tank breather
ordered my petrol tank atlast! coming in next 2 weeks fingers crossed!
i have asked the fabricator to put a feed in , return , and breather in etc
someone said i need to put a one way valve in it ? but i cant remember what pipe
also were shall i run the breather too ? take it highest point somewere
help pleaseee
i have asked the fabricator to put a feed in , return , and breather in etc
someone said i need to put a one way valve in it ? but i cant remember what pipe
also were shall i run the breather too ? take it highest point somewere
help pleaseee
Tom 
Ford Fiesta ST
Ford Fiesta ST
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Petrol tank breather
Are you still going to use the standard fuel filler?
The standard breather just goes to the filler pipe
Dan
The standard breather just goes to the filler pipe
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: Petrol tank breather
tdan_2k_uk wrote:Are you still going to use the standard fuel filler?
The standard breather just goes to the filler pipe
Dan
sorry ive should of said , and nooope im not , going to use a different type of filler neck
Tom
Ford Fiesta ST
Ford Fiesta ST
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Petrol tank breather
Tom,
Jamie's cut down his standard filler neck. Hes managed to get it so it just goes onto a flat surface.
He's putting the tank in the back and boxing it in, then putting the filler neck through the top flat surface
I'll get a pic of it
Jamie's cut down his standard filler neck. Hes managed to get it so it just goes onto a flat surface.
He's putting the tank in the back and boxing it in, then putting the filler neck through the top flat surface
I'll get a pic of it
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."