Page 1 of 1
rear door cards,
Posted: Thu Apr 12, 2012 10:28 pm
by mk1joe
hello,
i need a bit of help finding some templates for the rear door cards if anyone could help. i want to have some new cards made up but i need some sizes to go from. i haven't been able to find any on the internet so it would be great if someone could draw a template for me as i don't have any cards in the rear at the moment to go from. also its a soft top.
thanks for all the help
Joe
Re: rear door cards,
Posted: Thu Apr 12, 2012 10:42 pm
by dan_2k_uk
The bits above the arches or the rear door?
If its the rear door ur after Ive got mine that I just made in the kitchen and can measure it tomorrow for u.
Dan
Re: rear door cards,
Posted: Thu Apr 12, 2012 11:04 pm
by donkeychomp
And if its the arches card you need I have a few kicking about. Best bet would probably be to draw an outline on a (big) piece of paper and send it to you.
Alex
Re: rear door cards,
Posted: Fri Apr 13, 2012 12:15 pm
by mk1joe
thanks guys that would be great, i need both the rear door and over the wheel arches. just the size of the rear door would be great as i asume its just square and it would be wonderfull if you could post some templates of the side cards.
thanks Alex and Dan
Joe
Re: rear door cards,
Posted: Fri Apr 13, 2012 1:20 pm
by dan_2k_uk
Will measure mine later.
I made it slightly undersize so it dosent have bits to catch you sticking round the door.
Have a look at my build thread and let me know if its the size you are after abd I will post the measurements up.
Dan
Re: rear door cards,
Posted: Fri Apr 13, 2012 11:19 pm
by donkeychomp
PM me your address and I'll send the templates.
Alex
Re: rear door cards,
Posted: Sat Apr 14, 2012 10:19 pm
by mk1joe
dan_2k_uk wrote:Will measure mine later.
I made it slightly undersize so it dosent have bits to catch you sticking round the door.
Have a look at my build thread and let me know if its the size you are after abd I will post the measurements up.
Dan
hi Dan,
i had a look at your build thread and the size looked great thanks.
cheers
joe
Re: rear door cards,
Posted: Sat Apr 14, 2012 11:00 pm
by dan_2k_uk
here you go. All in mm
The little cut out is for the retaining cable that stops the door from opening too far so its up to you whether you want that.
Dan
Re: rear door cards,
Posted: Sun Apr 15, 2012 8:08 am
by Tramp
The door handle section is raised on your rear door, so I used x2 pieces of mdf & cut out the backing piece to clear it, of your using thin stuff you should be alright as its only raised around 10mm but it makes it awkward to fit your card flush if your making your card out if something non flexible
Re: rear door cards,
Posted: Sun Apr 15, 2012 10:08 pm
by mk1joe
brilliant, thanks for all the help guys, i have fitted the fronts and they look great, i will post pictures as soon as i fit the rear ones.
thanks again
joe