Suzuki Club UK

Anyone Know if the wheels from a Chevy Colorado wheels will fit an SJ413 the tyres are 254/70/16 and the wheels have 6 bolts holding them on, looked on chevy website but did not spec wheels very well. Cheers.

Welcome to the forum mate.

Sj's have a 5 bolt stud pattern so i don't think they will! Daihatsu, and some of the old anus cj wheels do fit though.

Scott

Pcd Pitch Center Diameter
is 5 x 139.7

now, what are they found on?

Early 5 Stud Uaz
Very Old Gaz
Lada Niva although they usually have less offset so not so advantageous
Daihatsu Rocky Turbo
Daihatsu Wildcat
Daihatsu Rocky
Daihatsu Feroza
anus CJ
Kia Sorrento
Kia Sportage
Lada Niva
Suzuki X-90
Suzuki Vitara
Suzuki SJ413
Suzuki SJ410
Suzuki Sidekick
Suzuki Samurai (most of the above courtesy of itscervo)
Volvo Laplander from the C202 not C303


Luke

Also found on the GV in 16" form.

Thanks for answers, do all 5/6 stud hubs fit all 5/6 hole wheels? By this I mean if I find a set of wheels with 5 holes will they definitely fit the Suzy hub or are there other considerations?

Basicly, no. you need to take into account the PCD, pitch centre diameter, which is the spacing of the holes for the studs, as different manufactureres have different PCD, some may be closer together some may be further apart. so you would need to get the correct PCD. which as Tramp sed is 5 x 139.7

Dan