Suzuki Club UK

hi there can any one tell me the diferance between a sj410 and a sj413 gearbox.
i have found out that the raico is diffrent but is that it ?

thanks Ross

The ratio is how many turns of the shaft that goes into the engine does, in reltion to the output shaft going into the T box.


I belive they have a different bell housing and some 410s had 4 speed.

thanks for that
i have sj410 and i puting in a 1.5 td and am thinking of useing a 413 gear box.
i sent a frind this link
and this it what i was asked to find out
1: If the clutch plate is the same it will give you an idea if the input shaft is any bigger
2: Is the third motion shaft bearing is the same , its more of a case of if its bigger then its beefier and should put up with a bit more of the extra power
Ross

http://www.suzukiclubuk.co.uk/specifications.html
the missing link

http://forum.difflock.com/viewtopic.php?t=38964

Have a read of that.