Suzuki Club UK

Hi folks, first post. Could someone please tell me if they have a carb like this on the SJ. Basically The samurai i bought had this carb fitted, but the engine will not tick over and I'm finding it hard to located where everything should go

Checked all electrics and put a little fuel straight in the carb and the engine ticked over. Looks like the jet is blocked or knackered

Part numbers on carb are: AISAN 8F25

Thanks in advance

Aisan is the manufacturer of the carb, it is the standard carb for the 413/ samurai, but i dont know about what goes where on them as i have a 410 so completely different carb so i cant help you there...

The stock carbs are good when new, but 20 years down the line they are a bit crap to say the least

Here's a clean up guide http://www.suzukiclubuk.co.uk/diy/15-en ... down-guide

If you do that and it still has issues then I would suggest spending a bit of cash on an SU carb and modified inlet manifold to improve the running and power of the engine.

to the club. Pdf file of the carb here if it's any help.
http://www.4x4.in.th/manual_sj413/chapter4.pdf

I always agree with replacing the standard carb. They are a good carb when they work properly but can be a giant pain in the arse if they aren't working. Overly complicated when they dont need to be!

Throw it at next doors dog and get yourself and SU, a weber or a nikki

Give it to me , I'll throw it at my neighbours dogs as there a dam noisy nusiance