what do they need to run

maxlee · Post by **maxlee** » Thu Apr 25, 2013 8:02 pm

alright guys

looking a turf and the wiring is a right mess, so i'm thinking off ripping it all out and starting again.
so the question is what wires dose the engine need to start and run?

live to the coil, live to the starter pluss trigger wire from a switch wire from the alternator?
not sure on the dizzy do these have points? or electric ign?

mk1joe · Post by **mk1joe** » Thu Apr 25, 2013 10:12 pm

what one is it? a 410 will have points, a 413 doesn't. i think the 413 dizzy is just a little sensor that does the same job as points though so its similar to wire up. someone here will know:)

Darrell · Post by **Darrell** » Thu Apr 25, 2013 10:45 pm

I scribbled this out before for a 413, its up to you if you want the oil pressure and 4wd light.
The 410 will be a little different as it has a wire bypassing the 410 ballast resistor.

maxlee · Post by **maxlee** » Sat Apr 27, 2013 10:16 am

thanks guys sorry its a 410

going to get some bits from work and get involved i think

going to leave the stock wiring there till its up and running then its all going in the bin

will do a build topic soon

Darrell · Post by **Darrell** » Sat Apr 27, 2013 2:03 pm

Modified for a 410 (I hope

. As usual, if anybody sees I've screwed up please say so

)

: 410 minimal wiring.jpg (45.63 KiB) Viewed 6703 times

The alternator wiring may be different if you have a early 410 with the voltage regulator not built in.

maxlee · Post by **maxlee** » Sat Apr 27, 2013 10:46 pm

thanks mate i thought the alt and starter were connected buy thicker wire to the + terminal?

Darrell · Post by **Darrell** » Sat Apr 27, 2013 10:58 pm

They are , that's just the diameter of my pen

Darrell · Post by **Darrell** » Mon Apr 29, 2013 8:25 pm

any better

Post by **Jordi** » Mon Apr 29, 2013 9:12 pm

Darrell wrote:They are , that's just the diameter of my pen

That just amused me. I love the fact you even went away and made the lines thicker and colour coded. Must have been a particularly boring part of the day when you found time to do that.

I'm sure you deserve a special tag line Darrell for all your diagrams and drawings you do for us.

maxlee · Post by **maxlee** » Thu May 02, 2013 7:11 am

my bad sorry mate

thank you

Suzuki Club UK

what do they need to run

what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

Re: what do they need to run

test