Page 1 of 1

su accelerator bracket help

Posted: Tue Jul 23, 2013 1:08 am
by timwilks13
I'm using a hif44 from a pair but neither pair has any sort of fixing for an accelerator cable, had a look to see if I could bodge on something from my aisian carb but to no avail. its a hard problem to explain but i need something like on the old aisian carb where you have a bit of bent channel that the cable sits in...sorry if I'm not explaining this very well, but here is the su without the bit I could do with.

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 8:51 am
by kibris

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 9:43 am
by timwilks13
thanks kibris but its where the throttle attaches to the butterfly that I'm missing, ill Photoshop something together tonight to explain.

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 11:35 am
by timwilks13
this is what I'm after, can anyone confirm it will go on my hif44?

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 11:35 am
by Darrell
This bit??

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 11:35 am
by timwilks13
this is what I'm after, can anyone confirm it will go on my hif44?

http://www.ebay.co.uk/itm/SU-HIF44-1-Ca ... 1055739366

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 11:36 am
by timwilks13
yea that bit, didn't see your post till I posted that Darrell sorry!

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 12:25 pm
by twiss
Its worth checking out sucarb.co.uk

Maybe give them a call and find out which one is best

http://sucarb.co.uk/levers-throttle-stops.html

Re: su accelerator bracket help

Posted: Tue Jul 23, 2013 9:02 pm
by Darrell
As Twiss said give them a ring. I've found this but don't know it its correct. Some SU's have a little tag with a number on for identification.
086.jpg
086.jpg (222.98 KiB) Viewed 7429 times
http://sucarb.co.uk/cam-lever-19084.html

Re: su accelerator bracket help

Posted: Fri Jul 26, 2013 10:05 am
by timwilks13
thank for your help guys, still havent found the exact bit im looking for, but all the above has been brilliantly helpful!! and i will continue to search, but in the mean time i have take the throttle arm off my old aisian carb, cut off the extra stopper arm bits and just bolted it on the the current SU throttle. Bit of a bodge but seems to work, ill put up a picture later if and when i remember to take one!