Suzuki Club UK

Im collecting a spi 8v lump from a breaker vitara

Ive got most of the lump mounts etc etc

Is there anything else needed for the spi engine that id need
From the vitara? Any electronic bits required?

Im on the understanding that I would just need a 12v fuel pump for
It to work?

If you wanna stick it on a SU or webber you need nowt but a leccy pump.

The gearbox bolts are handy if you are planning on mating to a 1300 gbox.

If you're not SPI already then you need the wiring loom and ECU, get the bracket with the relays on too. You will also need the inlet and exhaust manifolds with sensors and the MAP sensor from the bulkhead. Ideally get the VSS from the speedo too.

Cheers dudes

SU it is

andyrew wrote:Cheers dudes

SU it is

Good lad