Search found 15 matches

by Austin1999
Thu Apr 30, 2020 10:48 pm
Forum: SJ series Transmission, Axles, Brakes, wheels and tyres.
Topic: Diff flange seal
Replies: 1
Views: 2485

Diff flange seal

Hi
Does anybody know where i can buy the seal that goes behind the flange on the rear diff on my samurai? Some long grass got pulled into it last year and it has leaked since.
Thankyou - Austin
by Austin1999
Fri Nov 22, 2019 7:15 pm
Forum: Engine
Topic: High startup idle
Replies: 2
Views: 3190

Re: High startup idle

Thankyou, i may need to at some point. Iv stuck a fuse in the fault code slot and it there are no fault codes. It only does it from startup, when it has got warm and you restart the engine, it idles perfectly
by Austin1999
Sun Nov 17, 2019 9:58 pm
Forum: Engine
Topic: High startup idle
Replies: 2
Views: 3190

High startup idle

When starting my 1995 EFI samurai from cold, it revs up and idles at close to 3000rpm at startup and wont drop untill the engines hot.
Any ideas on how to adjust this as i dont think its normal.
Thankyou
by Austin1999
Wed Aug 28, 2019 9:19 am
Forum: SJ series Transmission, Axles, Brakes, wheels and tyres.
Topic: Gearbox output shaft seal
Replies: 2
Views: 3200

Re: Gearbox output shaft seal

Ok Thankyou, hopefully that will fix the issue!
by Austin1999
Tue Aug 27, 2019 12:04 am
Forum: SJ series Transmission, Axles, Brakes, wheels and tyres.
Topic: Gearbox output shaft seal
Replies: 2
Views: 3200

Gearbox output shaft seal

My SJ has developed a oil leak around the output shaft of the gearbox, on closer inspection there seems to be slight play in the output shaft which makes me think there is a bearing gone?
How could this be fixed? Is it just a push in oil seal? How do i change the bearing in the end?
Thank you
by Austin1999
Mon Feb 18, 2019 11:39 pm
Forum: Electrical
Topic: Interior light wiring
Replies: 6
Views: 5503

Re: Interior light wiring

Thanks for your help, i finally fixed it earlier, turns out at the top of the pillar the wiring had been bodged meaning that the wires were the wrong way round. Swapped them around and now the light works fine
by Austin1999
Sat Feb 16, 2019 3:46 pm
Forum: Electrical
Topic: Interior light wiring
Replies: 6
Views: 5503

Re: Interior light wiring

I still couldnt get it to work manually so i ran a wire from the negitive terminal of the battery to the manual part of the interior light and it still didnt work. I am not sure what to do next, yet it works when the door is open.
by Austin1999
Fri Feb 15, 2019 4:35 pm
Forum: Electrical
Topic: Interior light wiring
Replies: 6
Views: 5503

Re: Interior light wiring

Thanks very much, i done as you said today and found that the wires had corroded and broken. I rewired the section along the sill and now have 12v to the interior light. Next problem is that it only works when the drivers door is open. The wiring for the passenger door switch is missing. Any idea wh...
by Austin1999
Thu Feb 14, 2019 9:23 pm
Forum: Electrical
Topic: Interior light wiring
Replies: 6
Views: 5503

Interior light wiring

The interior light has never worked on my samurai, all wiring at the light end is connected up however when i use a multimeter it shows no output meaning that the wiring is broken, any ideas where the wires run so i can try and find the problem? Wiring diagrams dont actually show where the wires are...
by Austin1999
Sun Feb 03, 2019 8:41 pm
Forum: Electrical
Topic: Temp sender reading too high
Replies: 13
Views: 11997

Re: Temp sender reading too high

Yeah i think thats the problem, i have a spanish one