Good to finally see the Sj 👌 Number 6. Haven’t you already sourced a Tbox handbrake? The pics I saw are nothing out of the ordinary so It can easily be refurbed and swapped onto your tbox. They are very basic so apart from the shoes most things will just clean up and be fully serviceable. If you str...

Glad the bits got to you safely. That nipple from the airbox there’s a pipe that runs into a T piece to the PCV valve and across to the rocker cover. I should have one if you need it. If you end up back at the pressure regulator I think I have another I could send you another to test 😅 I’m going to ...

Have you tried brakes international? Always worth calling them. I’ve had a look through my box of bits and I’m not 100% sure I’ve got any sorry. I have these and can’t remember what they are out of though….maybe SJ? IMG_0072.jpeg Is your master cylinder a 15/16” (says on the underside so might need ...

Thanks. Were they genuine KOYO or counterfeit? Genuine boxes have a holographic sticker, a barcode and a QR code that you can scan to authenticate them on the KOYO website. Just a word of caution but I have a suspicion that your bearings were probably counterfeit by the sound of it so they might not...

I purchased kingpins and bearing set from India. Had to get machining done to get the bearing to fit. Can you please advise who the seller was so we know to avoid please. I would be concerned about the bearing quality as well if the kingpin was poor quality. Personally I’ve never had to replace the...

Was the set up and mount from a Jimny with an M series engine? You need a mount from a vitara G16 8v engine. It’s still not always a straight bolt on swap though as it can be tight for chassis clearance

Tbh I have a feeling I never run those ones I will have a look next time I’m up the workshop. I can’t actually remember if I’ve got anything running Aisin calipers at the moment but I could look at my dads Jimny as they use the Aisin callipers.

From the parts catalogue. These can be downloaded from the forum.
Hope that helps

100% worth buying ratchet crimpers if you want reliable crimps

No worries.

Just a thought. I presume you have a set of ratchet crimps for non insulated terminals? If not I’d get some to make sure all your new fuse terminals are crimped on well.