Search found 992 matches
- Thu May 23, 2013 10:32 pm
- Forum: The Bar
- Topic: why has he done this
- Replies: 17
- Views: 10156
Re: why has he done this
Must be the x-pack model
- Sun May 19, 2013 5:44 pm
- Forum: Vitara Specific Tech
- Topic: live axle conversion on vitara
- Replies: 5
- Views: 5879
Re: live axle conversion on vitara
I'd start with a set of stock rear springs, with those the spring rate will remain the same as the original springs, design the mounts to get the correct ride height. If you're going much higher than stock then a set of rear lift springs should be a bit firmer which will help to reduce weight transf...
- Sun May 19, 2013 5:38 pm
- Forum: SJ series Transmission, Axles, Brakes, wheels and tyres.
- Topic: Lockrite
- Replies: 13
- Views: 12093
Re: Lockrite
I have read on other sites that if you don't set up a lockright carefully, they tend to lock when you don't want them to, make lots of clanking, clacking and banging noises, and generally make you wish you'd done the job properly right from the start. They have to be correctly shimmed, it didn't us...
- Sat May 18, 2013 8:46 pm
- Forum: Engine
- Topic: Porting SJ 413 Heads - G13A 8valve
- Replies: 5
- Views: 7511
Re: Porting SJ 413 Heads - G13A 8valve
That's always my problem too. Thank you for the information its always good to get real data on these things.Kalahari wrote:Sorry Rhinoman, I could have gone to town at the bench but I am just too busy.
- Sat May 18, 2013 2:07 pm
- Forum: Engine
- Topic: Turbocharging the SJ413.
- Replies: 3
- Views: 3647
Re: Turbocharging the SJ413.
They stopped doing the turbo kit not long after the Vit was launched, the 1.6 conversion is a lot simpler and more reliable, it must be ten years since I saw a turbo'd SJ come up for sale. You could try asking on Zukiworld.com, there are a few turbo conversions on there.
- Fri May 17, 2013 1:51 pm
- Forum: Engine
- Topic: Porting SJ 413 Heads - G13A 8valve
- Replies: 5
- Views: 7511
Re: Porting SJ 413 Heads - G13A 8valve
Did you try flow testing it with the intake manifold bolted up, there was a guy in the US that used to rework the intake manifold and that was supposed to give good gains when used with a Weber. I have been collecting some cam specs here:
http://rhinopower.activeboard.com/t5359 ... aft-specs/
http://rhinopower.activeboard.com/t5359 ... aft-specs/
- Tue May 14, 2013 1:19 pm
- Forum: The Bar
- Topic: All at Sea
- Replies: 13
- Views: 8384
Re: All at Sea
How do you do that? when I try to drag it it pulls the whole map across.ScottieJ wrote:That any better you need to drag it to where you are when first set up
- Mon May 13, 2013 9:35 pm
- Forum: Engine
- Topic: F10D Viability
- Replies: 41
- Views: 32237
Re: F10D Viability
Yes, I don't know why I thought it was a G10BB, I think that must have been the Swift, I've got a couple of ECUs here and they both say F10D on them. I reckon that would be a good engine in a 410 and I've got a 410 based Blitz that needs a new engine - subscribed.
- Mon May 13, 2013 12:56 pm
- Forum: Engine
- Topic: F10D Viability
- Replies: 41
- Views: 32237
Re: F10D Viability
Did we get an F10D engine? I know we got the G10 but that bolts up to the 1.3 gearbox - that one is definately MPFI but I thought that the earlier model was TBI. Edit: Just Googled that, the Maruti built cars do have the F10D. I never looked that closely at them (other than the ECUs) I know a couple...
- Mon May 13, 2013 8:34 am
- Forum: Vitara Specific Tech
- Topic: Vitara FSM
- Replies: 3
- Views: 18625
Re: Vitara FSM
You need this one:ScottieJ wrote:Awesome! Thanks James, ill make this a sticky
If you have anything for the GV2000 covering the J20a that could be handy for me
http://www.rhinoman.org/manuals/GV/sq416_420.zip