410 Transfer Box Bearings

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
timwilks13
SCUK Website Padawan
SCUK Website Padawan
Posts: 1247
Joined: Sun Feb 03, 2013 5:55 am
Location: Scarborough, soon to be Poland

410 Transfer Box Bearings

Post by timwilks13 » Fri May 24, 2019 11:34 pm

Does anyone have a part number for the front output bearing? Can only find full rebuild kits but don't need it all.

Had the seal and circlip off hoping there would be a number stamped on the bearing but must be on the back side (or not at all) as I can't see one.
1986 SJ410 - Furry dice, new window winder.

10 kinds of people in this world, those who understand binary and those who dont.

if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: 410 Transfer Box Bearings

Post by Darrell » Mon May 27, 2019 10:45 pm

Enter your VIN and go from there https://catalogs.ssg.asia/suzuki/?lang=en#
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: 410 Transfer Box Bearings

Post by Darrell » Mon May 27, 2019 10:47 pm

Using the first one in the 410 list it
works out as a 6205N 25x52x15 grooved. I guess you can confirm the 25 and 52 measurements. https://catalogs.ssg.asia/suzuki/?lang= ... VsSWQ9PTEw
Last edited by Darrell on Mon May 27, 2019 10:48 pm, edited 1 time in total.
2005-GV 1600se, "Hell" What do I know!

User avatar
timwilks13
SCUK Website Padawan
SCUK Website Padawan
Posts: 1247
Joined: Sun Feb 03, 2013 5:55 am
Location: Scarborough, soon to be Poland

Re: 410 Transfer Box Bearings

Post by timwilks13 » Mon May 27, 2019 10:47 pm

Cheers Darrell! Anyone either got a 410 VIN number, or know if the output bearings are the same on the 413 and 410?
1986 SJ410 - Furry dice, new window winder.

10 kinds of people in this world, those who understand binary and those who dont.

if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: 410 Transfer Box Bearings

Post by Darrell » Mon May 27, 2019 10:55 pm

Unfortunately it needs to be your VIN to be accurate. I have no idea if the transfer box bearings varied over the years.
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: 410 Transfer Box Bearings

Post by Darrell » Mon May 27, 2019 11:22 pm

Appears they vary , have found a alternative number already.
2005-GV 1600se, "Hell" What do I know!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11595
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 410 Transfer Box Bearings

Post by ScottieJ » Mon May 27, 2019 11:37 pm

Just use your vin Tim. Late 410, 413 and samurai transfer boxes (i.e. with 4wd light switch) all share exactly the same bearings.

It's only the early type 410 transfer boxes that are different.
Zuki Build

Steady as she goes!

User avatar
timwilks13
SCUK Website Padawan
SCUK Website Padawan
Posts: 1247
Joined: Sun Feb 03, 2013 5:55 am
Location: Scarborough, soon to be Poland

Re: 410 Transfer Box Bearings

Post by timwilks13 » Thu May 30, 2019 6:46 pm

Got the part number, took the old bearing into a bearing place and he had the right one in about 2 minutes without even asking for the part number so that was easy!
1986 SJ410 - Furry dice, new window winder.

10 kinds of people in this world, those who understand binary and those who dont.

if you can read this you're too close to the monitor, sit back and save your eyes!!
My build, formally Trotters build.

Post Reply