Transfer box handbrake info.

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Transfer box handbrake info.

Post by Darrell » Wed Feb 23, 2011 10:25 pm

From the SJ413 workshop manual.
Attachments
2a.jpg
2a.jpg (155.04 KiB) Viewed 42475 times
1b.jpg
1b.jpg (99.21 KiB) Viewed 42475 times
1a.jpg
1a.jpg (174.41 KiB) Viewed 42475 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Wed Feb 23, 2011 10:28 pm

Next pages
Attachments
3b.jpg
3b.jpg (157.14 KiB) Viewed 42060 times
3a.jpg
3a.jpg (192.33 KiB) Viewed 42060 times
2b.jpg
2b.jpg (131.25 KiB) Viewed 42060 times
Last edited by Darrell on Wed Nov 16, 2011 7:18 pm, edited 1 time in total.
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Wed Feb 23, 2011 10:29 pm

next
Attachments
4a.jpg
4a.jpg (229.41 KiB) Viewed 42472 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Wed Feb 23, 2011 10:30 pm

Cable pics.........
Attachments
Image0014.jpg
Image0014.jpg (72.22 KiB) Viewed 42471 times
Image0012.jpg
Image0012.jpg (70.14 KiB) Viewed 42471 times
Image0011.jpg
Image0011.jpg (73.01 KiB) Viewed 42471 times
2005-GV 1600se, "Hell" What do I know!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11589
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Transfer box handbrake info.

Post by ScottieJ » Wed Feb 23, 2011 10:45 pm

Nice one Darrell! one for the stickies :mrgreen:
Zuki Build

Steady as she goes!

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Sat May 07, 2011 7:18 pm

Bit extra - Handbrake adjustment..

Just had a look through the info I put on there, it is straight from the suzuki manual. It doesn't show very well the adjusters so i have took a photo to enlarge it better.

Chock the front wheels,
Jack up and support the rear axle,
Let off the handbrake,
Remove rubber plug from handbrake drum,
Rotate drum until you can see adjuster wheel,
Turn adjuster wheel with a small screwdriver a little (can't remember which way :er: ) and then turn the rear propshaft by hand,
Repeat this until you feel/hear the shoe dragging on the drum,
Slacken off just a little to stop the drag,
Repeat with the other shoe adjuster.


Hope this helps, not very good at explaining things :oops:
DSCF0106.jpg
DSCF0106.jpg (106.17 KiB) Viewed 40426 times


Edited 5/5/2012 for extra info.

These diagrams and instructions are for Japanese built models. I have now found out that the Spanish version has a few differences, but mostly the adjuster mechanism. This can be adjusted on the rear of the backplate by turning the square protrusion. I assume this has a locknut as it's hard to tell on the diagram. Also the brake shoes are slightly different.
Basically if you have no access hole in the drum and a square protrusion on the back you have a Spanish one :thumbup:
Attachments
Transfer box handbrake types.jpg
Transfer box handbrake types.jpg (202.1 KiB) Viewed 40426 times
Last edited by Darrell on Sat Jun 15, 2013 3:05 pm, edited 2 times in total.
2005-GV 1600se, "Hell" What do I know!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11589
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Transfer box handbrake info.

Post by ScottieJ » Sun May 08, 2011 9:49 am

Spot on Darrel :thumbup:
Zuki Build

Steady as she goes!

User avatar
Newtomud
Can I have a tow
Can I have a tow
Posts: 478
Joined: Thu May 05, 2011 3:43 pm
Location: wolverhampton

Re: Transfer box handbrake info.

Post by Newtomud » Mon Aug 15, 2011 9:30 am

What is fig19-94 (A) special tool 09922-75221 used for? Can't see from the picture.

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Mon Aug 15, 2011 6:43 pm

It's a tool for stopping the drum from rotating whilst undoing the nut. I made my own from thick plate with some box section for a handle and I'm glad I did as it was really tight. If you want to make one I can post up the measurements. :thumbup:
Attachments
locking tool.JPG
locking tool.JPG (25.51 KiB) Viewed 42244 times
2005-GV 1600se, "Hell" What do I know!

User avatar
Newtomud
Can I have a tow
Can I have a tow
Posts: 478
Joined: Thu May 05, 2011 3:43 pm
Location: wolverhampton

Re: Transfer box handbrake info.

Post by Newtomud » Mon Aug 15, 2011 8:57 pm

Thanks Darrell.. Any info/pictures would be a great help :o)

Post Reply