Page 4 of 4

Re: Transfer box handbrake info.

Posted: Sun Jan 31, 2021 1:33 pm
by Marilyn
Group I gave looked at the part numbers of the 180x30 transfer handbrake brake shoes available online. Question if I purchase these do I needs to fit the handbrake lever off the old shoes and drill holes for springs as they appear to be different

Re: Transfer box handbrake info.

Posted: Thu Feb 04, 2021 4:30 pm
by Marilyn
Sorted now.thanks

Re: Transfer box handbrake info.

Posted: Sun Dec 03, 2023 5:05 am
by tomcat
timpaton wrote:
Mon Jan 16, 2012 8:31 pm
here is a close up
Are these pictures still available please? Thanks.

Re: Transfer box handbrake info.

Posted: Sun Dec 03, 2023 8:41 am
by ScottieJ
Hi
Those pics are in regards to the breather set up on the transfer box and not the drum brake so they are a bit off topic for this thread. Probably why they haven’t been fixed.

Are you looking to extend your breathers on your transfer box? If so I’ll grab some pics later and do a little how to in a different thread as it’s really easy.

Re: Transfer box handbrake info.

Posted: Sun Dec 03, 2023 9:56 am
by tomcat
ScottieJ wrote:
Sun Dec 03, 2023 8:41 am
Hi
Those pics are in regards to the breather set up on the transfer box and not the drum brake so they are a bit off topic for this thread. Probably why they haven’t been fixed.

Are you looking to extend your breathers on your transfer box? If so I’ll grab some pics later and do a little how to in a different thread as it’s really easy.
Would appreciate that. Thanks.

Re: Transfer box handbrake info.

Posted: Sun Dec 03, 2023 9:25 pm
by ScottieJ
Tbox breather extension guide can now be found here, I have removed all posts about them from this thread as they are off topic.

http://forum.suzukiclubuk.co.uk/viewtopic.php?t=15776

Thanks

Re: Transfer box handbrake info.

Posted: Fri Mar 15, 2024 8:48 am
by tomcat
I am interested in people's experience with a "standard" transfer box handbrake system or a X-Eng system.
Comments please. Thanks.

Re: Transfer box handbrake info.

Posted: Fri Mar 15, 2024 10:53 am
by ScottieJ
Standard transfer box system is fine, just needs adjusting occasionally.

X-eng has better holding power “when” it works, I found it needs more setting up and adjusting than a stock brake. It needs many mods to make it work reliably and not eat pads. It also rattles and has long handbrake lever travel. The cable routing is also a nightmare and you need to find the more flexible type of handbrake cable.
The calliper used for it is actually designed for small plant machinery like dumper trucks that only travel at low speeds, IMO it is not suitable for a road vehicle.

If used offroad then both might need the shoes replacing more often. However I find the stock shoes last longer than X-eng pads. I have had a set of new X-eng pads disappear in a weekend before.

I bought my X-eng when they came out, ran it for quite a few years but was never really happy with it. The last straw was when I bent the disc.
I took off my X-eng and went back to a standard drum. I have never regretted it and will never run another one. 😅

Re: Transfer box handbrake info.

Posted: Fri Mar 15, 2024 12:12 pm
by tomcat
Thank you Scottie.
Your detailed comments appreciated.