Transferbox guard template

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
ScottieJ
The Boss
The Boss
Posts: 11107
Joined: Tue Apr 15, 2008 11:13 am
Location: Chippenham, wiltshire

Transferbox guard template

Post by ScottieJ » Tue Mar 04, 2014 4:15 pm

image.jpg
image.jpg (41.05 KiB) Viewed 3640 times
Zuki Build

Steady as she goes!

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2133
Joined: Fri Sep 30, 2011 9:23 pm
Location: cornwall callington

Re: Transferbox guard template

Post by dazerede » Tue Mar 04, 2014 4:23 pm

Ok ideal what's the best thickness metal to use
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Home made bumpers and rollcage
1.6 8v vitara lump with su carb
3" calmini lift springs :)
235/75/15 maxxis trepador tyres
Janspeed exshaust
30mm Spacers
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3317
Joined: Thu Aug 18, 2011 2:49 pm
Location: Staines, Middx

Re: Transferbox guard template

Post by donkeychomp » Tue Aug 04, 2015 9:02 pm

I used 5mm on mine
If it ticks over...leave it

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4927
Joined: Tue May 06, 2008 4:19 pm
Location: Swindon, Wiltshire

Re: Transferbox guard template

Post by dan_2k_uk » Wed Aug 05, 2015 7:59 am

Would have thought 4mm would be sufficient. Look as the strength of the mounts. If you hit a real immovable object its going to rip it off the mounts before damaging the guard.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

Post Reply