SJ410 Pully

Engine not running right? see if we can help you!
border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: SJ410 Pully

Post by border » Sun Feb 14, 2021 8:17 pm

Ordered Parts water pump, timing kit and fan belt, should be here Thursday.
Might just find someone that knows what there doing to fit them, rather then me balls it up as usual.

border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: SJ410 Pully

Post by border » Tue Feb 16, 2021 7:24 pm

Well looks like I'm gonna have to have a go Myself, local 4x4 place quoted me £140 just for Labour, I'm getting parts myself.
How long should this job take by a qualified Mechanic ?,
Been looking at a few YouTube Vids and it shouldn't take that long.
Got my fingers crossed that I don't blow the timing up ;)

border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: SJ410 Pully

Post by border » Fri Feb 19, 2021 6:20 pm

Drove it a mile up to garage and the bloody pump went just as I was pulling in, water started to come through timing cover, hope it hasnt damaged anything. ?
Cant find any info on how to loosen this bolt on bottom pully, it just keeps turning, Anyone know how to crack it loose ?
Attachments
IMG_3694.JPG

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7525
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: SJ410 Pully

Post by Jordi » Fri Feb 19, 2021 6:48 pm

Stick it in gear. Get someone to put their foot on the brake and crack the nut.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: SJ410 Pully

Post by border » Fri Feb 19, 2021 9:00 pm

Jordi wrote:
Fri Feb 19, 2021 6:48 pm
Stick it in gear. Get someone to put their foot on the brake and crack the nut.
Nice one Mate, wouldnt have thought of that, shows how thick I am :D but still gonna have a go tomorrow, better then paying £140 at garage.
Do you think loosing that water through pump will have done any damage ?

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7525
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: SJ410 Pully

Post by Jordi » Sat Feb 20, 2021 8:49 am

Depends how long it ran for and how hot it got.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: SJ410 Pully

Post by border » Sat Feb 20, 2021 10:35 pm

Well I can now see why garage were going to charge 140 quid.
A lot longer and harder then I thought.
Got it done in a fashion anyway.
Didn't realise that I had to take both top and bottom cogs off to get to the water pump, thought I was going to get it without touching belt.
anyway got it done, only thing the new timing belt was wrong size, so refitted old one back on.
Filed back up with colent and Started up and ran great after warming up, thought it actually went a bit faster then usual.
Thanks for help Everyone.
Dont know why that pic is upside down, :er:
Attachments
IMG_3697.JPG
IMG_3698.JPG

User avatar
ScottieJ
The Boss
The Boss
Posts: 11596
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: SJ410 Pully

Post by ScottieJ » Fri Mar 05, 2021 3:17 pm

Good job.

Just make sure that the main crank and cam pulley bolts ae torqued up correctly with a torque wrench. last thing you want is those coming undone and wrecking the keyways.
Zuki Build

Steady as she goes!

Post Reply