Changing Springs

Post your questions about your suspension and steering problems here!
Turb()
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Dec 19, 2010 12:16 pm

Changing Springs

Post by Turb() » Mon Jan 10, 2011 8:45 pm

I need new springs on the front of my SJ which I should be getting at the end of the week.
To keep costs down I was going to have a go at doing them myself, how easy are they to do?
They look like 2 bolts at the top and 2 U bolts at the bottom? Anything else I need to bear in mind? Do I need to do anything with the shock absorber? Is it going to fall apart if I remove it?

User avatar
Henry
Suzuki Guru
Suzuki Guru
Posts: 1219
Joined: Wed Apr 01, 2009 6:08 pm

Re: Changing Springs

Post by Henry » Mon Jan 10, 2011 8:56 pm

Hear is a write up i did many moons ago...

Right hear we go again :roll: :lol:

This is my write up for the removal of springs, bushes, and a full replacement for a sj/sammy.

First off park the truck in a good position...
Image
Slacken all of the bolts you are going to be undoing. (4x U-Bolts 14mm, NOTE sj410 are 12/10mm 4x Shackel bolts 14mm, 2x rear spring bolts 17mm)

And jack the chasis up and sit it on blocks.
Image
Undo the U bolts and remove, followed by the plate that holds the spring onto the axel also the shock is mounted to this plate. Once this is out of the way you will be left with this.
Image
Repeat on the other side then jack the axel up so no weight is on the springs.
Image
Once that is done undo the front shackle and remove and allow the spring to drop right down
Image
Followed by the rear bolt so the entire spring falls down.
Image
Do that on both sides and you will be left with the 2 old springs.
Image




PART 2

Im my case my "new" springs are actually reclamed standard springs with the Add-a-leaf fitted to the spring pack.

Now these springs are fitted with completely shot bushes, and are unfit for re use.
Image
So i have a new set of bushes from Bits4Vits
Image

First off i need to remove the old bushes.
One hell of a job without a press ect, but i had a cunning plan, and since we arnt going to reuse the old ones why not????

Take a metal barrel or similar
Image
Cut it in half, (mind sharp edges)
Image
Punch some holes in the bottom and sides of it and start a fire!
Image
One the fire has established itself, chuck the end of the spring in, and go for a cuppa.
Image


Part 3

Once you have come back, the rubber should be well alight and will leave you with this
Image

Leave it to cool and start refitting the new bushes.
Image
I tapped mine in with a hammer using the clock face method
Image

After that fit the rear of the spring, and do the bolt up finger tight
Image
With that done, pop the old bushes out of the front of the chasis and pop the new ones in
Image
Once thats done, pull the spring up and refit the shackel
Image

With both sides done, all finger tight, we can position the axel back in place.
Get the axel back into its postion and refit the U bolts, and tighten up finger tight
Image
Image

With that start to tighten up all of the bolts
Image
Image

After that is all done at tightened up to the correct torque settings, take the anus of the stands, stand back and admire.

BEFORE
Image
AFTER
Image


After its all down and you have taken it for a drive, check all the bolts again, re torque, and job done!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Changing Springs

Post by twiss » Mon Jan 10, 2011 10:28 pm

Have you got a body lift on there are well, looks taller than mine :lol:
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
Henry
Suzuki Guru
Suzuki Guru
Posts: 1219
Joined: Wed Apr 01, 2009 6:08 pm

Re: Changing Springs

Post by Henry » Tue Jan 11, 2011 8:37 pm

Yeah i have a 2" body lift on it too. When i put the add a leafs on they where pushing out about 3" (2" springs already fitted to rear). Now they are around 2" lift.

Since then ive moved the cage mounts up my 2", and the bumper so all sits level and looks standard.

The tires in the pics abover where 29" 8-)

User avatar
ScottieJ
The Boss
The Boss
Posts: 11595
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Changing Springs

Post by ScottieJ » Tue Jan 11, 2011 8:52 pm

Nice write up Henry, its now a sticky :mrgreen:
Zuki Build

Steady as she goes!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4551
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Changing Springs

Post by ROBBIE » Wed Jan 12, 2011 10:47 am

i really like the way to remove the bushes :twisted: don the same thing on a bicycle 1 time with a blow torch
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Turb()
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Dec 19, 2010 12:16 pm

Re: Changing Springs

Post by Turb() » Wed Jan 19, 2011 7:26 pm

Changed my springs yesterday:

Image

The old springs are the ones on the right obviously, they were well and truely battered :twisted:

The only thing I would say is the truck is now seriously bouncy on the road. Like every tiny bump makes you bounce, its like when you see tractor drivers bouncing all over the place lol. Is that because the springs are new?

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Changing Springs

Post by Edweird » Wed Jan 19, 2011 7:44 pm

I think the fact they're new will contribute, be also, to me, the shortest leaf on your new springs looks longer than the shortest leaf on your old springs. That might also be a factor.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

Turb()
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Dec 19, 2010 12:16 pm

Re: Changing Springs

Post by Turb() » Wed Jan 19, 2011 7:51 pm

Yea they kinda went from being 2 and a bit leaves to 3 whole leaves :?:
Its just a shame as its gone from being a nice smooth drive to being really bouncy lol.
I took it for a 20 mile drive and it did get gradually better but its still not fab lol

The 20 mile drive was to my mates workshop for some dreaded welding tho that I spotted when I was underneath changing the springs :evil:

User avatar
ScottieJ
The Boss
The Boss
Posts: 11595
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Changing Springs

Post by ScottieJ » Wed Jan 19, 2011 10:24 pm

new springs tend to be a bit stiff at first but they'll bed in eventually. Where did you get them from? are they standard height? they look like they have a slight lift.
Zuki Build

Steady as she goes!

Post Reply