steering Z bar

Post your questions about your suspension and steering problems here!
User avatar
ScottieJ
The Boss
The Boss
Posts: 11595
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: steering Z bar

Post by ScottieJ » Mon Nov 24, 2014 11:41 am

I think my main concern would be the baby sized CVs in the Jimny front axle and the 2 pin diff, quite a bit weaker than samurai Units but at least the CVs can be upgraded.
Zuki Build

Steady as she goes!

User avatar
mattmiles
Got muddy boots
Got muddy boots
Posts: 51
Joined: Mon May 13, 2013 5:23 pm
Location: Tadworth, Surrey

Re: steering Z bar

Post by mattmiles » Mon Nov 24, 2014 12:21 pm

ScottieJ wrote:I think my main concern would be the baby sized CVs in the Jimny front axle and the 2 pin diff, quite a bit weaker than samurai Units but at least the CVs can be upgraded.
Yes absolutely. RSMFG supply 4 Pin conversion units to overcome this and allow you to fit a lockright if you wanted. Robs is also selling 26 spline chromemoly front shafts and HD CVs :rockin: Nice to see more bits available for Jimnys.

Matt

Tommo
Got muddy boots
Got muddy boots
Posts: 9
Joined: Fri Aug 22, 2014 6:36 pm

Re: steering Z bar

Post by Tommo » Thu Aug 27, 2015 10:19 am

Ive got a merc setup on my sj but the bar hits the springs and wont let go on full lock anyone know why
Attachments
IMG-20150823-WA0000.jpg
IMG-20150823-WA0000.jpg (139.86 KiB) Viewed 22085 times

User avatar
ScottieJ
The Boss
The Boss
Posts: 11595
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: steering Z bar

Post by ScottieJ » Thu Aug 27, 2015 12:00 pm

Tommo wrote:Ive got a merc setup on my sj but the bar hits the springs and wont let go on full lock anyone know why
The tie-rod looks bent
Zuki Build

Steady as she goes!

User avatar
gp7186
Engaged 4wd low
Engaged 4wd low
Posts: 112
Joined: Sun Sep 13, 2009 5:32 pm
Location: newcastle-under-lyme

Re: steering Z bar

Post by gp7186 » Thu Aug 27, 2015 3:09 pm

So does the top leaf of the spring pack
1991 Suzuki Samurai, 1.6 16v MPFI, 4.16:1 Transfer Box, Rear Lockrite Diff, SPOA, YJ Springs, 31X10.5x15 Maxxis Trepador Tyres on BK Wheels, 8000LB Winch and Bumper, PAS Conversion

booper169
Got muddy boots
Got muddy boots
Posts: 1
Joined: Tue Jan 26, 2016 1:29 am

Re: steering Z bar

Post by booper169 » Tue Jan 26, 2016 1:34 am

Hey i know this is an old thread but i have a question. I went to my local Mercedes Dealer because i wanted to order a new steering arm to use on my samurai. I wanted to just buy the Arm for the Passenger side of the Samurai so i could make a new Drag link and keep the stock tierod down in the stock location. Anyways i went and i ordered A new Arm from Mercedes part # 1163321720 which is said to be the right side. I got it home and noticed that it points towards the tire as if they sent me the wrong arm, the packaging says the correct part number. What im wondering does the Mercedes left arm go on the left side samurai and right mercedes on the right side. I just would like to find out if i ordered the correct arm but got sent the wrong one in the package.

Post Reply