Not covered by any of categories below, want a winch or need to buy some recovery gear then your question goes in here!
You will also find online parts catalogues, Service manuals and a other useful info here.
-
mattmiles
- Got muddy boots
- Posts: 51
- Joined: Mon May 13, 2013 5:23 pm
- Location: Tadworth, Surrey
Post
by mattmiles » Sat Nov 29, 2014 8:51 pm
Evening all!
As some of you may know, I recently had some fabrication work carried out by Rob and Andy at Off-Road Armoury! Thought I'd just say what a great experience I had with them.
The cage is 6 point external, with an internal cross brace just behind the seats. Rob and Andy also fabbed up a rear winch bumper for me.
Would highly recommend them!
(Pics attached)
Matt
-
Attachments
-
- SJ2.jpg (934.87 KiB) Viewed 8182 times
-
- SJ6.jpg (854.5 KiB) Viewed 8182 times
-
- DSC_0807.jpg (743.18 KiB) Viewed 8182 times
-
- DSC_0808.jpg (729.05 KiB) Viewed 8182 times
-
- DSC_0810.jpg (985.32 KiB) Viewed 8182 times
-
- DSC_0805.jpg (779.63 KiB) Viewed 8182 times
-
- SJ.jpg (988.68 KiB) Viewed 8182 times
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Post
by donkeychomp » Sat Nov 29, 2014 10:16 pm
Amazing work..amazing dosh.
I emailed them 5 years ago and they quoted a grand for something like that.
Looks very very nice though!
If it ticks over...leave it
-
gamble63
- Can I have a tow
- Posts: 275
- Joined: Tue May 06, 2014 9:50 pm
Post
by gamble63 » Sat Nov 29, 2014 11:52 pm
I was working there when your Sj was in, Loved having a good old nose around your truck, its great!
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
-
Contact:
Post
by twiss » Mon Dec 01, 2014 3:28 pm
Looks a lot better than the hash up of an engine swap they did for me 10 years ago
Seriously though truck looks fab
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
kiwizook
- SCUK Addict
- Posts: 879
- Joined: Fri Dec 28, 2012 2:36 am
- Location: Masterton, NZ
Post
by kiwizook » Mon Dec 01, 2014 6:21 pm
what's under those two frontmost mounts? they put a brace down to the chassis or is it just bolted to the body?
It's not a question of how much you spend on your suzuki, but when your money will run out
-
RickUK
- Can I have a tow
- Posts: 459
- Joined: Sat Jan 09, 2010 7:31 pm
- Location: Not sure me Tom Tom is bust,but it could be North of Watford Gap.Could be Bedfordshire though.
-
Contact:
Post
by RickUK » Mon Dec 01, 2014 6:40 pm
That is one nice looking motor,do you plan on adding a front winch as well or just keeping it with the rear one ??? out of interest why did you go for the rear option rather than a front mounted winch like most folks use ???
Deceased.
SJ413 tinwormed to the great car grave yard in the sky.
Vitara LWB V6 engine deceased and also in the great grave yard in the sky.
www.hideones.info www.hideones.info
Current wheels.
BMW X5 Le Mans 3.0turbo diesel.
Looking for a newish Suzuki Jimny.
-
mattmiles
- Got muddy boots
- Posts: 51
- Joined: Mon May 13, 2013 5:23 pm
- Location: Tadworth, Surrey
Post
by mattmiles » Tue Dec 02, 2014 11:47 am
Cheers for the comments chaps! Very happy with the way it turned out.
RickUK wrote:That is one nice looking motor,do you plan on adding a front winch as well or just keeping it with the rear one ??? out of interest why did you go for the rear option rather than a front mounted winch like most folks use ???
I'll be sticking with just the rear winch for now matey, like to keep it simple! There was no real logic as to why I went for a rear winch over a front. I wanted to add a rear bumper that could withstand a few nudges, and it would also be needed for the cage mount, it was a good opportunity to add a winch. I guess a bit of weight over the rear axle isn't a bad thing either.
Few more pics. The internal cross brace is bolted through the floor to the chassis, and through the roof to the centre loop.
Matt
-
Attachments
-
- DSC_0809.jpg (157.89 KiB) Viewed 8066 times
-
- DSC_08151.jpg (87.28 KiB) Viewed 8066 times
-
- DSC_07981.jpg (79.84 KiB) Viewed 8066 times
-
ScottieJ
- The Boss
- Posts: 11601
- Joined: Tue Apr 15, 2008 12:13 pm
- Location: Chippenham, wiltshire
Post
by ScottieJ » Tue Dec 02, 2014 12:54 pm
looks good, what size is the tube?
-
mattmiles
- Got muddy boots
- Posts: 51
- Joined: Mon May 13, 2013 5:23 pm
- Location: Tadworth, Surrey
Post
by mattmiles » Tue Dec 02, 2014 1:25 pm
ScottieJ wrote:looks good, what size is the tube?
Hey matey,
Main tubes are 1 3/4", the cross braces on the roof and internal tubes are 1 1/2" I believe.
Have you decided what sort of size you'll be using on your buggy build?
Matt
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Post
by Anton » Tue Dec 02, 2014 1:27 pm
That's very nice work! Liking the internal cross brace, should make the whole thing much, much stronger!
