Buzzing noise from large heat sync under passenger side dash

Anything Suzuki related, but not technical, it goes here!
User avatar
SlimGrim
Winching along now
Winching along now
Posts: 510
Joined: Tue Oct 13, 2015 3:39 pm
Location: Norwich Norfolk
Contact:

Buzzing noise from large heat sync under passenger side dash

Post by SlimGrim » Thu Sep 08, 2016 7:43 pm

Under the dash above the passenger side footwell is a large round aluminium heat sync, which has recently taken to clicking really fast when the engine is running until I turn the lights on at wich point it stops, the noise returns when I turn them off again, any ideas on what this is and why it could be doing this?
___________________

1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)

User avatar
SlimGrim
Winching along now
Winching along now
Posts: 510
Joined: Tue Oct 13, 2015 3:39 pm
Location: Norwich Norfolk
Contact:

Re: Buzzing noise from large heat sync under passenger side

Post by SlimGrim » Thu Sep 08, 2016 7:45 pm

This
Attachments
image.jpeg
image.jpeg (213.19 KiB) Viewed 7403 times
___________________

1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Buzzing noise from large heat sync under passenger side

Post by twiss » Thu Sep 08, 2016 8:14 pm

Think its the dim dip relay. Should be OK to just unplug it
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Buzzing noise from large heat sync under passenger side

Post by zook123 » Fri Sep 09, 2016 9:02 am

It's your AirBag ECU, or Flux Capacitor :)
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

User avatar
SlimGrim
Winching along now
Winching along now
Posts: 510
Joined: Tue Oct 13, 2015 3:39 pm
Location: Norwich Norfolk
Contact:

Re: Buzzing noise from large heat sync under passenger side

Post by SlimGrim » Fri Sep 09, 2016 10:44 am

I have an airbag!?
___________________

1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Buzzing noise from large heat sync under passenger side

Post by zook123 » Fri Sep 09, 2016 10:50 am

haha, nope! I do. If it works or not is another question!
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3583
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Buzzing noise from large heat sync under passenger side

Post by donkeychomp » Fri Sep 09, 2016 9:24 pm

I have the same issue with my LJ and the noise stops when I brake. Why it does this is a complete mystery.
If it ticks over...leave it

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Buzzing noise from large heat sync under passenger side

Post by dan_2k_uk » Fri Sep 09, 2016 10:20 pm

Dim dip unit. Unplug and chuck it.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
SlimGrim
Winching along now
Winching along now
Posts: 510
Joined: Tue Oct 13, 2015 3:39 pm
Location: Norwich Norfolk
Contact:

Re: Buzzing noise from large heat sync under passenger side

Post by SlimGrim » Fri Sep 09, 2016 10:25 pm

is it useless or should i replace?
___________________

1988 SJ413 (JSA) Samurai, SoftTop - White (sometimes)

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Buzzing noise from large heat sync under passenger side

Post by ROBBIE » Sat Sep 10, 2016 2:56 am

No need to replace
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Post Reply