GV2000 2001 3DR FAT BOY WHEEL CENTRES

All tech relating to the Suzuki Vitara that won't relate to any other models, Front IFS etc.
Post Reply
Otts
Got muddy boots
Got muddy boots
Posts: 3
Joined: Tue Aug 01, 2017 1:08 pm

GV2000 2001 3DR FAT BOY WHEEL CENTRES

Post by Otts » Tue Aug 01, 2017 1:23 pm

Hi Newbie here :D ,

I have a 2001 Y reg, GV2000 3DR SOFT TOP with the Fatboy trim.

I have had the car from new,it's a dream...

Just had a small problem occur, I have got 16" Alaska alloys fitted, which are still like new, but the centre caps
have started dropping off , arrrghhhhh.

The centres are stamped with "COBRA", are 7" in diameter and have two x fixings 140mm centre to centre.
Would anyone know where I get replacements, have tried loads of different wheel shops,EBbay etc..,but not having any luck.

The wheels look ugly as sin without and I'm trying to avoid buying a new set of wheels...

Thanks,
Neil.

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3273
Joined: Thu Aug 18, 2011 2:49 pm
Location: Staines, Middx

Re: GV2000 2001 3DR FAT BOY WHEEL CENTRES

Post by donkeychomp » Tue Aug 01, 2017 11:10 pm

Pic of the wheels would be handy.
If it ticks over...leave it

Otts
Got muddy boots
Got muddy boots
Posts: 3
Joined: Tue Aug 01, 2017 1:08 pm

Re: GV2000 2001 3DR FAT BOY WHEEL CENTRES

Post by Otts » Wed Aug 02, 2017 8:02 pm

Hi, hopefully pictures now attached :oops:

1st has the only centre remaining !!

Cheers,
Neil.
Attachments
Alaska alloy 1.PNG
Alaska alloy 1.PNG (118.08 KiB) Viewed 596 times
Alaska alloy 2.PNG
Alaska alloy 2.PNG (930.71 KiB) Viewed 596 times
Alaska alloy 3.PNG
Alaska alloy 3.PNG (915.55 KiB) Viewed 596 times
Alaska alloy 4.PNG
Alaska alloy 4.PNG (795.11 KiB) Viewed 596 times

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3273
Joined: Thu Aug 18, 2011 2:49 pm
Location: Staines, Middx

Re: GV2000 2001 3DR FAT BOY WHEEL CENTRES

Post by donkeychomp » Wed Aug 02, 2017 8:26 pm

That's got me stumped. If there are none about at all an option would be to get them made with a 3D printer. Not that expensive, I had a small part made and it cost me £8.
If it ticks over...leave it

Otts
Got muddy boots
Got muddy boots
Posts: 3
Joined: Tue Aug 01, 2017 1:08 pm

Re: GV2000 2001 3DR FAT BOY WHEEL CENTRES

Post by Otts » Wed Aug 02, 2017 8:35 pm

Cheers, have seen one on EBay in the US, $30 for one, and it looks shabby.
Will go with the 3D idea, will let you know how I get on.

Thanks,
Neil...

Post Reply