Cruise Control in a Jimny

All tech relating to the newest bread of suzuki 4x4s
Post Reply
prolecs
Got muddy boots
Got muddy boots
Posts: 2
Joined: Sun Jun 21, 2020 11:59 pm
Location: Brisbane Australia

Cruise Control in a Jimny

Post by prolecs » Thu Jan 14, 2021 9:07 am

Finally got the Suzuki cruise control (vacuum actuator) fitted in my Jimny!
A wiring diagram would have been bloody helpful!!!! But it's up and running.
I scored a unit out of Liana, part number on the control box 202-3226, but the wiring to brake/clutch switches gave me a big headache.
I have actually swapped over the whole Liana steering wheel and factory switches (with a little modification here and there). Got the pulse wire sorted from the speedo, and the actuator is fitted and setup in the engine bay.
Works like a charm :lol: :lol:

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Cruise Control in a Jimny

Post by Anton » Sat Jan 16, 2021 11:27 pm

Nice! Got photos of the conversion?
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Post Reply