Project Bodge
- Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Project Bodge
Its come on really well I'm diggin the 33's
Re: Project Bodge
Body lift was my first thought but it would make my new bumpers sit 2" to low. So i thought i would go all out and buy new springs. I spoke to Dave at Llama 4x4 and he is getting some made up for me, also ordered a rough country steering damper4eye wrote:would a body lift be cheaper buddy....2"s should do the trick....plus the lift from aal
should be enough...although it depends on anything else that will need changing!
but if you are going for the new springs & don't need the aal i may be interested in them
My add-a-leafs will probably be up for grabs in a couple of weeks, but il let you know.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Re: Project Bodge
No chance Scott I'm to close to the finnish to start chopping it up again.
Got these in the post today. Should give me the extra lift i need, also had the top leaf in each pack made out of slightly thicker metal to help prevent sagging or bending.
Going to be busy this weekend
Got these in the post today. Should give me the extra lift i need, also had the top leaf in each pack made out of slightly thicker metal to help prevent sagging or bending.
Going to be busy this weekend
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Re: Project Bodge
sweet.....how much d'they set ya back mate??
ITS NOT LEAKING OIL...........SHE'S MARKIN HER TERRITORY!!!!!!!!
my ride.........
+2 lift....grizzley boots is all i need!
my ride.........
+2 lift....grizzley boots is all i need!
Re: Project Bodge
Well they weren't cheap, with postage they were £440 from Llama 4x4.
Got them all fitted today. Should have plenty clearence now
Should be pretty much finnished tomorrow i recone. May evan be ready for a mot next week if i can get the engine running properly.
Il get some more pics up tomorrow.
Got them all fitted today. Should have plenty clearence now
Should be pretty much finnished tomorrow i recone. May evan be ready for a mot next week if i can get the engine running properly.
Il get some more pics up tomorrow.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
- Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Project Bodge
what brand are they and how much lift?
they should still flex all right because there are only 3 leafs, I like them alot!
Luke
they should still flex all right because there are only 3 leafs, I like them alot!
Luke
Re: Project Bodge
I dont think they are any brand in particular. Dave at Llama 4x4 gets them custom made by some company in the uk, so you can have them made to any specification you want. Mine are 2.5" lift, but he can make them 1" to 3" lift. Also you can have 2,3,4 leafs in the pack depending on how much flex you want.
Im well happy with them Hopefully il get a chance to test them out soon
Im well happy with them Hopefully il get a chance to test them out soon
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
- albertross74
- Can I have a tow
- Posts: 322
- Joined: Tue Jan 05, 2010 5:53 pm
- Location: Guernsey/Brighton
- Contact:
Re: Project Bodge
pictures please! I'm loving this build, nice work man.
1988 Suzuki SJ413 hard-top with 235/75/r15 General Grabber AT2s & AAL
http://www.flickr.com/photos/albertross74/
http://www.myspace.com/picturesbyalasdairround
http://www.flickr.com/photos/albertross74/
http://www.myspace.com/picturesbyalasdairround
Re: Project Bodge
Ok so its pretty much up together now, just a few bits and pieces left to sort out. I took it for a quick test drive earlier just up the road and back. It was alot faster with the vit engine, i was quite surprised Felt a bit juddery thoe, i think a couple of the uj's have gone. They felt a bit dodgy when i put the props back on. The brakes were really awfull i think a combination of rusty disks and ceased calipers were to blame.
Really need to address the gearing aswell with these 33s. Im on the hunt for a rocklobster at the moment but there quite hard to come by.
So not quite ready for a mot yet, but getting closer Still have to make some wheel arches aswel, as the land rover ones i bought dont cover the wheels.
Oh and the wheels do clear the inner arches now with the new lift springs on, but now they catch on the spings when on full lock. So i may have to try and limit the steering some how.
Any way heres some pics......
Really need to address the gearing aswell with these 33s. Im on the hunt for a rocklobster at the moment but there quite hard to come by.
So not quite ready for a mot yet, but getting closer Still have to make some wheel arches aswel, as the land rover ones i bought dont cover the wheels.
Oh and the wheels do clear the inner arches now with the new lift springs on, but now they catch on the spings when on full lock. So i may have to try and limit the steering some how.
Any way heres some pics......
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.