Swivel hubs?

A place for all UK LJ owners to introduce themselves and for all LJ series tech and builds
Post Reply
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Swivel hubs?

Post by ROBBIE » Tue Dec 27, 2016 4:57 pm

Hello all, is this kit any good for rebuilding my front LJ/SJ axle? https://www.ebay.co.uk/itm/112227747731
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

juncopartner
Engaged 4wd low
Engaged 4wd low
Posts: 137
Joined: Fri Dec 30, 2011 1:53 pm
Location: York

Re: Swivel hubs?

Post by juncopartner » Tue Dec 27, 2016 8:19 pm

Indian made bearings!!! Personally I won't use them. I rebuild a lot of Lambrettas and cos they were also built in India there are a lot of bearings coming in from India and some are absolute shite. Personally I only use European or Japanese manufactured bearings. There may be some decent Indian bearings out there but I havn't found them yet.

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Swivel hubs?

Post by ROBBIE » Tue Dec 27, 2016 10:06 pm

Haha yeah get what you mean
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: Swivel hubs?

Post by zook123 » Wed Dec 28, 2016 8:41 am

What's the cost of genuine ones? I only use Blueprint / Genuine parts, so far so good!
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Swivel hubs?

Post by ROBBIE » Wed Dec 28, 2016 12:55 pm

I need everything, seals, bearings, kingpin and hub, felts and rubbers
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Swivel hubs?

Post by twiss » Wed Dec 28, 2016 12:58 pm

tbh I'm using indian made kingpin bearings bashing the shit out of them on rocks and they've lasted about a year... same as blueprint ones lasted me in the UK
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11603
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Swivel hubs?

Post by ScottieJ » Wed Dec 28, 2016 1:16 pm

some blueprint bearings are better than others.....their UJs are junk

I only ever use timken or koyo for kingpins
Zuki Build

Steady as she goes!

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Swivel hubs?

Post by andyrew » Wed Dec 28, 2016 1:39 pm

The swivel set i ordered ages ago from india came with koyo bearings.
Andys Rusty Suzuki Emporium

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Swivel hubs?

Post by ROBBIE » Wed Dec 28, 2016 4:59 pm

andyrew wrote:The swivel set i ordered ages ago from india came with koyo bearings.
Cool, same company by any chance
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Swivel hubs?

Post by andyrew » Wed Dec 28, 2016 6:10 pm

This is the one i had, item number.

112106539794
Andys Rusty Suzuki Emporium

Post Reply