My First Suzuki - SJ413
My First Suzuki - SJ413
Hello,
I'm the proud new owner of a 1990 SJ413.
Purchased off ebay, purchased SORN, currently getting some welding (wheel arches and sills) and some new brakes.
Looking to restore it back to its original state in the coming weeks. Also just purchased a roof tent which should be interesting.
Any advise on the following would be appreciated...
Bumper bracket placement (cant for the life on me see where the bumper used to hang)
Roof rack advice (thinking of making my own for my roof tent but if anyone knows of anywhere that I can get a nice 90's looking safari style one...)
Colour code for this dark grey?
Thanks,
Adam.
I'm the proud new owner of a 1990 SJ413.
Purchased off ebay, purchased SORN, currently getting some welding (wheel arches and sills) and some new brakes.
Looking to restore it back to its original state in the coming weeks. Also just purchased a roof tent which should be interesting.
Any advise on the following would be appreciated...
Bumper bracket placement (cant for the life on me see where the bumper used to hang)
Roof rack advice (thinking of making my own for my roof tent but if anyone knows of anywhere that I can get a nice 90's looking safari style one...)
Colour code for this dark grey?
Thanks,
Adam.
- Attachments
-
- IMG_5932.JPG (1021.08 KiB) Viewed 12497 times
-
- IMG_5971.JPG (282.33 KiB) Viewed 12497 times
-
- IMG_5946.JPG (247.7 KiB) Viewed 12497 times
-
- IMG_6602.JPG (871.51 KiB) Viewed 12497 times
Re: My First Suzuki - SJ413
http://www.expeditionportal.com/forum/t ... Rack-Build
This was the style of roof rack I was thinking of making. Hardy.
This was the style of roof rack I was thinking of making. Hardy.
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: My First Suzuki - SJ413
The bumper mounts have been cut off. Theres a tube cross member through the front of the chassis, you can see it in the first pic.
Originally the tube came out further, and had a flat plate on each end that the bumper bolted to
Originally the tube came out further, and had a flat plate on each end that the bumper bolted to
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
- twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: My First Suzuki - SJ413
Also welcome to the forum and the world of Suzuki
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
- stevepsj413
- Engaged 4wd low
- Posts: 193
- Joined: Fri May 31, 2013 10:58 pm
Re: My First Suzuki - SJ413
Hi there and welcome.
I think the colour code is 38b, charcoal gray metallic. Looks the same as my 89 hardtop. There should be a small vin plate in drivers side footwell with it stamped on there mate.
I think the colour code is 38b, charcoal gray metallic. Looks the same as my 89 hardtop. There should be a small vin plate in drivers side footwell with it stamped on there mate.
- Jordi
- Bow down before me
- Posts: 7534
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: My First Suzuki - SJ413
Welcome to SCUK.
As said. The original bumper mounts were part of that front tube cross-member and have been cut off.
Paint code will be in the VIN plate.
As said. The original bumper mounts were part of that front tube cross-member and have been cut off.
Paint code will be in the VIN plate.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: My First Suzuki - SJ413
Hello
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: My First Suzuki - SJ413
Wellcome and good luck with all the recovering.
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: My First Suzuki - SJ413
Welcome to SCUK.
As above the bumper mount has been cut down. Very common when removing the bumper and fitting larger tyres.
As above the bumper mount has been cut down. Very common when removing the bumper and fitting larger tyres.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: My First Suzuki - SJ413
Bit of progress.
Cleaned the sills and wheel arches up and got it through its MOT. Had a roof rack built, but not painted yet and attached the roof tent. Removed old school decals, which I'm still in two minds about doing and got some nice little chrome wing mirrors for it too.
Cleaned the sills and wheel arches up and got it through its MOT. Had a roof rack built, but not painted yet and attached the roof tent. Removed old school decals, which I'm still in two minds about doing and got some nice little chrome wing mirrors for it too.
- Attachments
-
- IMG_6935.JPG (160.63 KiB) Viewed 12233 times
-
- IMG_6948.JPG (631.69 KiB) Viewed 12233 times
-
- IMG_7036.JPG (605.75 KiB) Viewed 12233 times