rear disk pads

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

rear disk pads

Post by urbanzook » Thu Oct 09, 2008 9:59 pm

i put new pads an disks all round my sj an the rears have worn down 2 metal an the fronts look new.???
ain't it meant to be the front you use the most??????
what could cause this?
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

muddy kev
Engaged 4wd low
Engaged 4wd low
Posts: 176
Joined: Thu Oct 09, 2008 9:25 pm
Location: east sussex

Re: rear disk pads

Post by muddy kev » Thu Oct 09, 2008 10:12 pm

are the rear pads all worn down, ie both pads on each side or is it just 1 pad per side?

User avatar
zook123
SCUK Addict
SCUK Addict
Posts: 948
Joined: Sun Apr 20, 2008 10:48 pm
Location: Shepton Mallet

Re: rear disk pads

Post by zook123 » Fri Oct 10, 2008 10:01 am

sounds like the brakes are running a bit lame!
Image
2002 Jimny O2 Ragtop
Safari Snorkel, Freewheeling Hub Conversion
Diff Breathers, G/Box and T/Box Breathers, 2in Suspension Lift
HD Recovery Points and Winch Plate
Kuhmo KL71 MT / Goodyear Wrangler AT


Wessex 4X4 Reponse - WE411
wessex4x4response.org.uk

User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

Re: rear disk pads

Post by urbanzook » Fri Oct 10, 2008 5:34 pm

both pads on one side worn.
not checked the othere side guna 2 night so ill let ya no
but looks ok.
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

Re: rear disk pads

Post by urbanzook » Fri Oct 10, 2008 7:13 pm

ok just checked all 4 sets there was one pad with excessive wear.
passanger rear inner pad.
did notice that all 4 rear pads where worn wonky.
Attachments
pads.jpg
pads.jpg (75.93 KiB) Viewed 9079 times
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

muddy kev
Engaged 4wd low
Engaged 4wd low
Posts: 176
Joined: Thu Oct 09, 2008 9:25 pm
Location: east sussex

Re: rear disk pads

Post by muddy kev » Fri Oct 10, 2008 7:42 pm

blimey they are worn! how long did it take 2 get them that low? they all seem very low and if the fronts are still ok must be something holding them on. are the dics blue'd ? would be if calipers are sticking causing over heating, if not try the load compensator may be your doing most of your braking on the rears. hope this helps.

User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

Re: rear disk pads

Post by urbanzook » Sat Oct 11, 2008 10:12 am

i changed them all six months ago the frunts look new an the backs are as you see them.
there is no blueing off the disk.
i think the hangers are sitting wonky an the pads are not sitting right.
wearing them unevenly fast.
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

k30rdj
Got muddy boots
Got muddy boots
Posts: 9
Joined: Thu Oct 09, 2008 3:56 pm
Location: holywell north wales

Re: rear disk pads

Post by k30rdj » Sat Oct 11, 2008 2:53 pm

defo sticking on think you need a service kit or 2

User avatar
urbanzook
Winching along now
Winching along now
Posts: 526
Joined: Tue Jul 08, 2008 8:04 pm
Location: stevenage
Contact:

Re: rear disk pads

Post by urbanzook » Sat Oct 11, 2008 5:17 pm

i must add i also had all 4 callipers re-bilt
DONT FOLLOW ME YOU WONT MAKE IT !!!
SEE WOT I GET UP TO CLICK ME!!!!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: rear disk pads

Post by ScottieJ » Mon Oct 13, 2008 12:28 pm

how have you done your rear disk conversion, from the way the pads are worn it almost looks like the callipers are not sitting square to the disks?
Zuki Build

Steady as she goes!

Post Reply