Newbie from Mid Wales

New to SCUK.co.uk? say hello, give us an idea of who you are, and show us a pic of your pride and joy. were friendly and wont bite!
User avatar
Team Pink
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Aug 21, 2011 5:48 pm

Re: Newbie from Mid Wales

Post by Team Pink » Tue Aug 23, 2011 8:46 pm

A few current pics of engine and gearbox as requested
Attachments
20110823_85.jpg
20110823_85.jpg (266.9 KiB) Viewed 5276 times
20110823_91.jpg
20110823_91.jpg (316.79 KiB) Viewed 5276 times
20110823_93.jpg
20110823_93.jpg (310.02 KiB) Viewed 5276 times

User avatar
Team Pink
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Aug 21, 2011 5:48 pm

Re: Newbie from Mid Wales

Post by Team Pink » Tue Aug 23, 2011 9:05 pm

Picture of a mock-up of the body, I have remade the buck for the front and rear wings since this was taken and redone the windscreen aperture to take a SJ screen. Now that I am fitting LR axles I will change the arches as they need to be 2" wider each side.
Attachments
20100826_67.jpg
20100826_67.jpg (397.65 KiB) Viewed 5274 times

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Newbie from Mid Wales

Post by ScottieJ » Wed Aug 24, 2011 1:52 pm

I bet it's going to fly with the redtop :mrgreen: it was pretty quick with the quad carb 16V

:smokin:
Zuki Build

Steady as she goes!

User avatar
Team Pink
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Aug 21, 2011 5:48 pm

Re: Newbie from Mid Wales

Post by Team Pink » Wed Aug 24, 2011 5:56 pm

ScottieJ wrote:I bet it's going to fly with the redtop :mrgreen: it was pretty quick with the quad carb 16V

:smokin:
Scott,unfortunately it was a single carb 44mm HIF, I was going quad carbs but decided that a bigger engine was better in the long run. 16v had 100hp, about 75 to the wheels, Redtop should have 180hp, about 150 to the wheels. The truck is 5' 8" tall at ride height and will be wider than previous incarnation, CoG is also lower. If it does not fly I will have wasted several hundred hours on it!

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Newbie from Mid Wales

Post by Edweird » Wed Aug 24, 2011 9:07 pm

Thanks for the pics. Did you make the gearbox to t-box shaft and stuff, or are they from something?
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
Team Pink
Got muddy boots
Got muddy boots
Posts: 88
Joined: Sun Aug 21, 2011 5:48 pm

Re: Newbie from Mid Wales

Post by Team Pink » Wed Aug 24, 2011 9:44 pm

Interemediate prop is home made, uses one end from the SJ intermediate prop, the other end is uses the prop that matches the gearbox, in my case a carlton prop. The tube size happens to be the same so cutting and shutting is easy.
Carlton gear ratios are best as there is a smaller jump 2nd to 3rd, Omega gearboxes are much more common now as most Carltons have given in to tin worm. Omega clutch is hydraulic, Carlton is cable, I prefer hydraulic for off road use as it is much easier to completely seal the bell housing, cable is easier as the SJ is already set up for it.
I am fitting a flat flywheel as it is lighter, I will need to space out the clutch slave to ensure it engages. I have a 6 paddle clutch to fit, when I pull the engine to paint the chassis I will set up the clutch.

Tim

User avatar
Edweird
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2531
Joined: Sat Jan 23, 2010 11:04 pm
Location: Brigg, North Lincolnshire

Re: Newbie from Mid Wales

Post by Edweird » Wed Aug 24, 2011 10:09 pm

Well, I happen to have fairly easy access to all things late 80s and 90s Vauxhall. My dad's into MK2 Astras and Carltons, but if I'm going to do a conversion, it'll be in a few years time yet, and I'll probably just use a plain black-top 2.0 16v.
There's three ways of doing things:

The right way,
The wrong way
And my way, which is like the wrong way but faster.

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Newbie from Mid Wales

Post by ScottieJ » Thu Aug 25, 2011 9:17 am

Team Pink wrote:
ScottieJ wrote:I bet it's going to fly with the redtop :mrgreen: it was pretty quick with the quad carb 16V

:smokin:
Scott,unfortunately it was a single carb 44mm HIF, I was going quad carbs but decided that a bigger engine was better in the long run. 16v had 100hp, about 75 to the wheels, Redtop should have 180hp, about 150 to the wheels. The truck is 5' 8" tall at ride height and will be wider than previous incarnation, CoG is also lower. If it does not fly I will have wasted several hundred hours on it!
Ah I didn't realise that you never fitted the bike carbs :oops: my mistake :lol: that is pretty low, you've beat me by 1" :lol: mine is 5'9" but my COG Will be quite a bit higher with the raised transmission.

I'm sure it will fly, the first time you hit a jump around a comp safari course :guns:
Zuki Build

Steady as she goes!

Post Reply