Hi guys ,
im new to the offroading and thinking about going down the suzuki route, ive ever owned a one so not sure what to look for. i dont have a lot to spend but need to be taxed and motd to drive to venues. im in the northeast and dont mind doing a few jobs to sort a one out .
cheers
new to forum
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: new to forum
Hi and
To be honest if your good with a welder and a set of spanners the only thing to worry about is the price.
If you can't weld find one with a solid (ish) body and dont worry too much about the other stuff as they are basically a mecano set.
The main things are normal engine checks.
Check 4wd engages in hi and low.
If your new to 4x4s the gear lever will feel like a spoon in porridge. Dont worry about it.
Check there is no oil leaking from diffs or transfer box.
Common rust areas are behind seats. Body mounts behind seats. Just inside rear door. Front and rear arches and front footwells.
Try to avoid anything with a shackle lift as it is bad for the springs in the long run.
The samurai has wider axles which are preferred due to stability.
I'm sure someone else will add a load more to this.
Dan
To be honest if your good with a welder and a set of spanners the only thing to worry about is the price.
If you can't weld find one with a solid (ish) body and dont worry too much about the other stuff as they are basically a mecano set.
The main things are normal engine checks.
Check 4wd engages in hi and low.
If your new to 4x4s the gear lever will feel like a spoon in porridge. Dont worry about it.
Check there is no oil leaking from diffs or transfer box.
Common rust areas are behind seats. Body mounts behind seats. Just inside rear door. Front and rear arches and front footwells.
Try to avoid anything with a shackle lift as it is bad for the springs in the long run.
The samurai has wider axles which are preferred due to stability.
I'm sure someone else will add a load more to this.
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: new to forum
hi what he/\ /\said
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
Re: new to forum
to the club and good luck with your search
Re: new to forum
to :S:cuk matey
rust rust and rust! thats what you need to look out for look for it everywhere you possibly can when buying an SJ!
rust rust and rust! thats what you need to look out for look for it everywhere you possibly can when buying an SJ!