Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Jay18 · Post by **Jay18** » Sat Mar 31, 2012 6:57 pm

was the 5 speed box a straight swap? I'm looking at fitting one to mine...

dazerede · Post by **dazerede** » Sat Mar 31, 2012 9:06 pm

it wasnt a 413 box it was 1 of the rare 410 5 speed box that i picked up for £5 wat a bargain and think the 4 speed box is better off road and the 5 speed is better 4 long trips

dazerede · Post by **dazerede** » Sat Mar 31, 2012 9:22 pm

hopefully be respraying my truck in couple of weeks and was just wondering how many litres of paint did you use to respray your truck jay

Jay18 · Post by **Jay18** » Sun Apr 01, 2012 7:44 am

ahh right I was wondering if the 413 box would be a straight swap and as for paint I went a little over the top and bought a 5Litre tin considering the amount of rust I had I dont want it going back that way all I've done is brushed it on got 3 coats so far and only used about half the tin but will be giving it a couple more with a roller, you'd be surprised how it comes up I used truck paint...

chrisj410 · Post by **chrisj410** » Sun Apr 01, 2012 8:16 am

I used tractor paint on mine heated the body work up got a brush and slapped it on it looked the dogs

dazerede · Post by **dazerede** » Sun Apr 01, 2012 11:30 am

might be using this paint its only £14.00 a tin
http://www.vapormatic.com/tractor-parts ... st/VLB5055

ROBBIE · Post by **ROBBIE** » Sun Apr 01, 2012 1:04 pm

i used satin black rattle cans to do mine. ive always got 1 in the car so i can touch it up if green lanes get a bit too scratchy

dazerede · Post by **dazerede** » Sun Apr 01, 2012 2:09 pm

ye with this VAP tractor paint you can buy 1 litre tins or you can buy rattle cans so i might get 2 tins of paint and 2 rattle cans for my truck

dazerede · Post by **dazerede** » Tue Apr 03, 2012 9:44 pm

i couldnt open my drivers door from in side of vehicle so i had to wind down the window use the out side handle to open the door. so i bought a new door mechanism and i still had the same problem so i thought long and hard and realised that the hook (i think thats what u call it well if not ive got a pic) wasnt in the right posision well what a day a least ive got a spare door mechanism that still works

#

dazerede · Post by **dazerede** » Tue Apr 03, 2012 9:51 pm

well started to sand down my doors and bonnet ready for respraying
naw ready to remover the doors witch is going to be fun

Suzuki Club UK

Suzuki sj 410 from Cornwall PROJECT Never Ending Project

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

Re: suzuki sj 410 from cornwall PROJECT

test