2 inch lift mods?

Post your questions about your suspension and steering problems here!
Post Reply
Richie
Engaged 4wd low
Engaged 4wd low
Posts: 192
Joined: Fri Nov 09, 2012 6:23 pm

2 inch lift mods?

Post by Richie » Sat Nov 24, 2012 5:21 pm

Hi all, after about 30 man hours i have allmost finished my 2 inch body lift lol.
atm it has
31 inch tyres
2 inch lift shackles front and rear
2 inch body lift

everything else is standard

DO i need to mod or change anything else to make this drive well on/off road with the extra 2 inch body lift?
I.e steering colum length, steering bar etc?
Thx, Rich

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: 2 inch lift mods?

Post by Jordi » Sat Nov 24, 2012 6:29 pm

I would say wheel spacers. Unless your wheels have a real good offset. Otherwise it will foul chassis and possibly bulk head even though you've done the body lift on full lock.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: 2 inch lift mods?

Post by donkeychomp » Sat Nov 24, 2012 11:02 pm

What Jordi said but if you have a 413 transfer case, get a 410 one. I knoweth about 31" tyres with a standard case...you lose so much power...
If it ticks over...leave it

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: 2 inch lift mods?

Post by turbo-tom » Sat Nov 24, 2012 11:04 pm

ive got 31inch tyres on standard diffs, 1.6vit engine , 4 speed box and 410 transfere box and the gearing is good! its not brilliant but its good enough for me :D
Tom :)

Ford Fiesta ST :D

Richie
Engaged 4wd low
Engaged 4wd low
Posts: 192
Joined: Fri Nov 09, 2012 6:23 pm

Re: 2 inch lift mods?

Post by Richie » Sun Nov 25, 2012 4:36 pm

the wheels are 15 inch vitara deep dish (10 inches wide) as far as i know they dont hit on the body but ive rolled the inner arches back alittle :)

Its a 410 with a 4 speed box, before i put the 31s on i had 27s and we could hit 74 mph :D
As long as it can sit about 55-60mph im happy, if not then i will get around to putting a 1.6 vitara or 3.5 rover engine in.

so as far as u guys know i shouldnt have any other probs with the extra lift?

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 2 inch lift mods?

Post by ScottieJ » Mon Nov 26, 2012 12:58 pm

Personally I would see if you can fit standard length shackles now that you have the body lift. it will improve the steering response and handling. The longest shackles I would run on an SJ with standard springs would be around 90-100mm between bolt centres.
Zuki Build

Steady as she goes!

Post Reply