New Member from Bristol

New to SCUK.co.uk? say hello, give us an idea of who you are, and show us a pic of your pride and joy. were friendly and wont bite!
Post Reply
User avatar
DaveB
Got muddy boots
Got muddy boots
Posts: 25
Joined: Sun Jan 20, 2013 9:44 am
Location: Bristol

New Member from Bristol

Post by DaveB » Mon Jan 28, 2013 1:37 pm

Hi

I'm Dave. I joined last week because I had a problem with the temperature sensor on my 1988 SJ410 Santana. I posted the problem and within hours I got several very helpful replies and I have now sorted the problem. Thanks guys.

Anyway, I inherited the car following the death of my son 15 years ago, he loved the car and I can't bring myself to sell it. I have kept the car roadworthy although I don't use it that often, it still hasn't done 40k. I have a little bit more time on my hands at the moment and although the car's in reasonable condition it needs a bit of TLC (bit of rust here and there and brakes pulling to one side etc), so I'm going to spend some time attempting (in my case it would be an attempt) to get it looking and driving well. I'm sure I'll be back asking questions and would welcome your advice.

I've attached some photos, Cheers Dave
1988 SJ410 Santana.jpg
1988 SJ410 Santana.jpg (401.36 KiB) Viewed 5537 times
Santana 2.jpg
Santana 2.jpg (390.34 KiB) Viewed 5537 times
Santana 3.jpg
Santana 3.jpg (429.1 KiB) Viewed 5537 times

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: New Member from Bristol

Post by ScottieJ » Mon Jan 28, 2013 2:10 pm

Here's a formal :welcome: to :suzuki: club UK


Woooowww that is an incredibly tidy SJ410, a few small patches of surface rust is rare on one of that age, it's usually more like a few large rusty holes, no sills or inner wings left :lol:

I'm not far from you in corsham so if you ever need a hand I can offer some assistance. Also if you ever need a body shop I have a friend who works in one in Warmley and would probably be up for a bit of work 'on the side' at a cheaper rate than normal. :thumbup:
Zuki Build

Steady as she goes!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: New Member from Bristol

Post by ROBBIE » Mon Jan 28, 2013 2:26 pm

Hi :welcome: that's very nice. Its nice to see them looked after
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: New Member from Bristol

Post by Jordi » Mon Jan 28, 2013 2:29 pm

Hi :welcome: to :BS: CUK

Tidy looking little motor.

You're absolutely right too bud, the knowledge / info some of the lads on here have is a great help. Assisted me many, many, many a time.

I hope everything goes ok with it. It's nice to see an original Zuk being cared for.

Jordi
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
dazerede
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2141
Joined: Fri Sep 30, 2011 10:23 pm
Location: cornwall callington

Re: New Member from Bristol

Post by dazerede » Mon Jan 28, 2013 2:32 pm

Welcome nice looking 410 that looks nice
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit :)
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT

User avatar
DaveB
Got muddy boots
Got muddy boots
Posts: 25
Joined: Sun Jan 20, 2013 9:44 am
Location: Bristol

Re: New Member from Bristol

Post by DaveB » Mon Jan 28, 2013 2:53 pm

Guys, Thanks for the warm welcome :thumbup:

Scottie, the offer of assistance is much appreciated and I'm sure I'll be taking you up on it soon. Your friend in Warmley also sounds interesting, thanks.

I intend to keep the car as original as possible and although I don't get out in it as much as I should, when I do, I certainly enjoy driving it. During the snow, my wife was the only one to get in work, everyone was stuck on the main roads but we sailed through using side roads - Great! that's another reason I can't sell it!!

Cheers and thanks again, Dave :doublethumbs:

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: New Member from Bristol

Post by turbo-tom » Mon Jan 28, 2013 4:04 pm

Welcome to scuk Dave that looks like you have a clean 410! :D
Tom :)

Ford Fiesta ST :D

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: New Member from Bristol

Post by dan_2k_uk » Mon Jan 28, 2013 4:08 pm

:welcome:

Nice tidy 410 there!
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

Post Reply