Vit Radiator into SJ

Engine not running right? see if we can help you!
User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Re: Vit Radiator into SJ

Post by Cyprus Geoff » Sun Apr 07, 2013 11:03 am

Hey Scottie - still loosing weight? :hahaha: :hahaha:

User avatar
ScottieJ
The Boss
The Boss
Posts: 11623
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Vit Radiator into SJ

Post by ScottieJ » Wed Apr 10, 2013 1:54 pm

Cyprus Geoff wrote:Hey Scottie - still loosing weight? :hahaha: :hahaha:
I stopped my Fast today ;)

Thought I'd post some pics of how it's now mounted, It's easier with electric fans as you can pretty much position the rad however you want It.

Note the trimming on the bottom right side to clear the Vit P/S with wedge set up.
Image

Image

I made to brackets for the rubber 'feet' to sit in on the front crossmember
Image

I cut down the old mount on one side to utilize the header tank mount, then fabricated a small bracket off it to mount the the body, I have a feeling there was already a captive nut on this side in the body that I used.
Image

Then made a small bracket for the other side as well, this time I used a Rivnut on the body though.
Image
Zuki Build

Steady as she goes!

User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Re: Vit Radiator into SJ

Post by Cyprus Geoff » Wed Apr 10, 2013 2:57 pm

Thanks Mate!

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Vit Radiator into SJ

Post by Jordi » Wed Apr 10, 2013 6:01 pm

Looks awefully interesting. I don't think the rad i've bought has mounts with it though.

Cheers for sorting the pics Scottie. They give me an idea of how tight it's going to be. I'm sure out of all the steel i have lying about i can knock something up.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Vit Radiator into SJ

Post by turbo-tom » Wed Apr 10, 2013 6:06 pm

Just a few pictures of mine insperation from this sticky! i did mine a bit different at the top had to trim a bit of the bonnet out of bolt head of the brackets to go through and i got a mate to stick a bit of metal at the bottom and greased and popped the rubbers in, also i didnt have to trim the rad because i forgot you could do it so i moved it off from centre still works though.

Image

Image
Tom :)

Ford Fiesta ST :D

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Vit Radiator into SJ

Post by Jordi » Wed Apr 10, 2013 6:11 pm

I like those top mounts Tom. Mine is getting delivered tomorrow so it'll be a job for the week i'm off.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
Cyprus Geoff
Can I have a tow
Can I have a tow
Posts: 251
Joined: Sun Apr 20, 2008 5:54 am
Location: Paphos, Cyprus

Re: Vit Radiator into SJ

Post by Cyprus Geoff » Fri May 10, 2013 4:20 am

Tom, looking at the plate you mounted your two fans on, does the plate not inhibit cooling at all?

Also, what are the fans off?

Cheers,
Geoff

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Vit Radiator into SJ

Post by turbo-tom » Fri May 10, 2013 10:51 am

Doesnt really effect it that much to be honest I like my engine to run a bit hotter then standard anyway so you get a bit more oompph out of them

The fans are universal ones of ebay
Tom :)

Ford Fiesta ST :D

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Vit Radiator into SJ

Post by dan_2k_uk » Fri May 10, 2013 11:05 am

Mine over cools with standard shroud and viscous fan plus the open front end of the SJ compared to a vit so Scotties will probably be about right and Toms a bit warm.

I dont mind it being a bit overcooled as it gives leaway for when the rad gets full of mud :D
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Vit Radiator into SJ

Post by turbo-tom » Fri May 10, 2013 12:35 pm

Sounds about right Dan, see when I override the fans you can watch my temp guage drop all the way down and takes ages for it to come back up to temp I think at the end of it its personal choice :)
Tom :)

Ford Fiesta ST :D

Post Reply