Project KJA

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Sun Jun 16, 2013 11:47 pm

Hi, small update,

My dad had spent ages trying to unstick the steering thing that connect to the steering box as it was to short for the jimmy one, but he got there with lots of heat and force. It now slides, but has got to be repainted now before it can go in.

New vit rad is all in with the electric fan. Just got to paint the brackets then its in for good.

Spent the afternoon stripping and cleaning everything to do with the heater, simple but took for ever, stinking inside it was. Just glad it all spit apart so I could get it all out.

All that's in now and the wiper mechanism is in. Just lost a skinny nut off the wiper stub, hoping it will turn up.

Just got to remember how all the loom goes and the heater cables, might have to check past photos lol.

Any way, I'll keep you updated

Ian
New bit rad in :)
New bit rad in :)
image.jpg (1.74 MiB) Viewed 5284 times
Bit of the guts in
Bit of the guts in
image.jpg (1.63 MiB) Viewed 5284 times
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Sun Jun 16, 2013 11:49 pm

I'd thought I'd try it, didnt think it would. but since when could we upload photos off a iPad, tidy.
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
User avatar
OllieSJ
...
...
Posts: 0
Joined: Tue Feb 28, 2012 2:15 pm

Re: Project KJA

Post by OllieSJ » Mon Jun 17, 2013 12:01 am

looking neat mate did u get your glove box fixed still got mine if u need it ??
Sj410Q- Spacers, Bucket seats, Su carb , Mot and Tax
Top
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Mon Jun 17, 2013 12:04 am

Oh bugger, I forgot about that. I'll have it off you tho, I'll pm you now. Oh and cheers.

Ian
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Project KJA

Post by turbo-tom » Mon Jun 17, 2013 12:07 am

Looking really smart mate! i have done the same design with your radiator brackets! i can move the whole sj by the rad so they dont move at all honest! :lol:
Tom :)

Ford Fiesta ST :D
Top
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Mon Jun 17, 2013 12:19 am

Yea, simplest thing I could think of, solid enough. Was going to go over board on it but there is no point. It's not going any where. :thumbup: job done,

Wish I'd noticed the sticky on the subject before I started it , might not have taken so long lol

Ian
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Project KJA

Post by dan_2k_uk » Mon Jun 17, 2013 9:24 am

Keep it up. Getting real close now. :thumbup:
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Sat Jun 29, 2013 5:36 pm

Afternoon all,

Dash stripped and cleaned on a nice sunny day,
Cleaned dash
Cleaned dash
image.jpg (1.7 MiB) Viewed 5197 times
And by the awsome power of my dremel it was also treated to a clock
Clock
Clock
image.jpg (1.89 MiB) Viewed 5197 times
All I got to do now is fit it all

Ian
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Project KJA

Post by turbo-tom » Sat Jun 29, 2013 9:02 pm

nice clean dash! i forgot when my dash looked like that! :lol:
Tom :)

Ford Fiesta ST :D
Top
User avatar
ianedwards
SCUK Addict
SCUK Addict
Posts: 878
Joined: Thu Sep 15, 2011 8:23 pm
Location: Brecon Powys

Re: Project KJA

Post by ianedwards » Sat Jun 29, 2013 11:11 pm

I took the lot apart, even took all the vents and surrounds out lol, humming it was. Had to be done lol
Cheers

Ian. :)

1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Top
Post Reply

Return to “Builds and Projects”