July 6th-7th Wiltshire by-way session

Know of any events or gatherings happening at your local Pay and play site? let us all know.

Also the place to discuss Green Laning and the responsible use of B.O.A.T.s
User avatar
NylonAdmiral
Winching along now
Winching along now
Posts: 521
Joined: Wed Apr 03, 2013 8:39 pm
Location: Devizes, Wiltshire
Contact:

Re: July 6th-7th Wiltshire by-way session

Post by NylonAdmiral » Sun Jul 07, 2013 9:57 pm

Plan is to fit modern interior from whatever current Nissan's have nice leather seats, modern engine and running gear. New suspension/brakes etc then a respray, possibly in red or black.

I'll then run it as a daily driver.

I'm currently looking for a crash damaged Skyline GTR for donor engine so if anyone know's anyone who's written one off that would be very handy! :)

Basically, it'll be tax exempt, £100 to insure, classic 70's styling with modern performance and reliability.
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!

User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: July 6th-7th Wiltshire by-way session

Post by turbo-tom » Sun Jul 07, 2013 10:07 pm

Sounds one heck of an awesome build! :rockin:
Tom :)

Ford Fiesta ST :D

User avatar
NylonAdmiral
Winching along now
Winching along now
Posts: 521
Joined: Wed Apr 03, 2013 8:39 pm
Location: Devizes, Wiltshire
Contact:

Re: July 6th-7th Wiltshire by-way session

Post by NylonAdmiral » Sun Jul 07, 2013 10:23 pm

Thanks, I teckon it should be pretty cool.

It's something I've always wanted to do, I love old cars but they're not reliable enough to use as daily drivers so this should give tge best of both worlds :D
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!

User avatar
Karis
Engaged 4wd low
Engaged 4wd low
Posts: 187
Joined: Fri Sep 09, 2011 12:41 pm
Location: Wiltshire

Re: July 6th-7th Wiltshire by-way session

Post by Karis » Sun Jul 07, 2013 10:56 pm

:( I want a Datsun :(
Karis
2000 Grand Vitara 2.5 V6 :)

User avatar
NylonAdmiral
Winching along now
Winching along now
Posts: 521
Joined: Wed Apr 03, 2013 8:39 pm
Location: Devizes, Wiltshire
Contact:

Re: July 6th-7th Wiltshire by-way session

Post by NylonAdmiral » Mon Jul 08, 2013 8:04 am

Karis wrote::( I want a Datsun :(
I thought you'd like it Karis :)

Well I reckon it's going to take me at least a year to do but once I'm finished you're welcome to have a go in it.
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!

User avatar
Karis
Engaged 4wd low
Engaged 4wd low
Posts: 187
Joined: Fri Sep 09, 2011 12:41 pm
Location: Wiltshire

Re: July 6th-7th Wiltshire by-way session

Post by Karis » Mon Jul 08, 2013 9:25 am

NylonAdmiral wrote:
Karis wrote::( I want a Datsun :(
I thought you'd like it Karis :)

Well I reckon it's going to take me at least a year to do but once I'm finished you're welcome to have a go in it.

:doublethumbs: that would be awesomeeeeeeee!
Karis
2000 Grand Vitara 2.5 V6 :)

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: July 6th-7th Wiltshire by-way session

Post by Jordi » Mon Jul 08, 2013 11:34 am

Status report of my Zuk (& me)

Exhaust blowing (only a small hole about two inches square where its vibrated the mount off) - to weld up
Air filter - dead, it was rather dusty
Oily bits. Still leaking but never topped up and still full
New temp sender off Andy good. Rest of the cooling system not so good.
Tick over - lumpy. Service required.
Outside - cleaner than it was due to some very narrow, very prickly bushes.
Inside - dirty, very dirty. May even have to clean it out now.
Tyres - very impressed.
Rebuilt calipers spot on
Sun burn, still red (except the white spots where the mud was).
Spine - Broken

For those concerned the diff oil was £5 a litre. You know who you are.

Congrats to Dan for never having any issues or laying a spanner on his Zuk all weekend. To be fair mine ran really well. Just a bit hot. At no point did i have to use spanners or add any fluids of any kind to it.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: July 6th-7th Wiltshire by-way session

Post by twiss » Mon Jul 08, 2013 12:35 pm

Ahhh go on then...

SU carb screws need finding and replacing
Rear diff needs replacing (but is still working!)
Need to swap front prop flange and refit
Need to get different alternator so I can send trotters back!! (thanks trotter!)
Edit: also replace/refit front axle oil seals!!!

Jordi I'll buy you a few pints for the diff oil, although it just kind of spread itself out all over wiltshire!
I noticed it has leaked on my work car park so theres gotta be some in there still!!!
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: July 6th-7th Wiltshire by-way session

Post by ScottieJ » Mon Jul 08, 2013 12:45 pm

Mine

Now runs better than it did when I started the weekend after leaning off the mixture screw as it had wound itself out, shame I left it until around 3.00 on sunday to sort :lol:
Is covered in mud everywhere
needs new front wheel bearing and possibly a kingpin bearing or 2
New back axle and diff: awesome.....but....
needs a new rear hub oil seal after the bearing being loose, I didn't check after fitting the axle :hammer: and it leaked diff oil all the way to the meeting point, now it now has a small leak
need to give Jordi some dosh for diff oil (or a 33" tyre for a spare ;) )
Trucker arm, quite a few shades redder/browner than my left arm
mildly saw back (thank f**k for YJs :mrgreen: )
Need to fit an extra screw onto my SU after giving Twiss one
Zuki Build

Steady as she goes!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: July 6th-7th Wiltshire by-way session

Post by twiss » Mon Jul 08, 2013 2:41 pm

ScottieJ wrote:Need to fit an extra screw onto my SU after giving Twiss one
I'll buy you and Dan 3 new screws each if you like :)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

Post Reply